Page 472 - 实耐宝完整US版1500

TOOLS PULLERS: 2- AND 3-JAW HYDRAULIC Maximum (mm) outside Pressure Screw Jaw Thickness, Jaw Width,

Heavy-Duty
Maximum
Maximum
Stock No.
Reach, inches Spread, inches Spread, inches
inches (mm)
inches (mm)
Size, inches
(mm) inside
(mm)
CG654HY
1-1/2–3-1/2
CG654HY†
5/8–11 x 13-3/4
3 (76)
4-1/2 (114)
3/4 (19)
1/4 (6)
(38–89)
Hydraulic, 2-Jaw
1-1/2–3-1/2
CG655HY*
5/8–11 x 13-3/4
4-1/2 (114)
3/4 (19)
1/4 (6)
3 (76)
Hydraulic, 3-Jaw
(38–89)
†Includes hydraulic ram and pump set.
*To convert to manual power, use pressure screw, adjusting nut and yoke from either CG250 or CG253 Pullers.
CG655HY
10-Ton Capacity (9.1 t) Maximum Spread, inches Pressure Screw Jaw Thickness, Jaw Width,
HAND CG274HY CG274HY† 8-3/4 (222) 3–8 (76–203) 3–8 (76–203), 3/4–10 x 16-1/4 1/4 (6) 15/16 (24)
Maximum
Maximum
Reach, inches Spread, inches
Stock No.
Size, inches
inches (mm)
inches (mm)
(mm) outside
(mm) inside
(mm)
2 Jaw
10-1/2 (266)
CG275HY†
8-3/4 (222)
15/16 (24)
1/4 (6)
3–8 (76–203)
10 (254)
3/4–10 x 16-1/4
3 Jaw
4-3/4–11-1/2
CG276HY†
1 (25)
15 (381)
3/8 (9)
3/4–10 x 23-3/8
13-3/4 (349)
2 Jaw
(121–292)
4-3/4–11-1/2
CG277HY*
1 (25)
3/8 (9)
3/4–10 x 23-3/8
13-3/4 (349)
15 (381)
3 Jaw
(121–292)
†Includes hydraulic ram and pump set.
CG275HY
*To convert to manual power, use pressure screw, adjusting nut and yoke from either CG270 or CG273 Pullers.
GENERAL
20-Ton Capacity (18.1 t) Combination 2 and 3 Jaw
Maximum Reach, Maximum Spread, Pressure Screw Jaw Thickness, Jaw Width, inches
Stock No.
inches (mm) inches (mm) outside Size, inches inches (mm) (mm)
CG400HYA* 9-1/2 (241) 13 (330) 1-1/8–8 x 20-1/2 7/16 (11) 1-1/4 (32)
CG400 CG400HYA less hydraulic ram and pump
Manual version of CG400HYA. Includes CG343-1 4ʺ Plug and
CG343
CG400HYA CG300-1 1-14 Pressure Screw in place of ram and pump
CG405HYA* 14 (355) 15 (381) 1-1/8–8 x 20-1/2 9/16 (14) 1-1/4 (32)
CG405 CG405HYA less hydraulic ram and pump
CG343
CG348 Manual version of CG405HYA. Includes CG343-1 4ʺ Plug and
CG305-8 1-14 Pressure Screw in place of ram and pump
CG425HYA* 19 (482) 20 (508) 1-1/8–8 x 20-1/2 1-1/8 (29) 1-1/2 (38)
CG425 CG425HYA less hydraulic ram and pump
Manual version of CG425HYA. Includes 1-3/8ʺ-8 x 20-11/16ʺ pressure screw
CG325 in place of pump, ram, washer adaptor, ram adaptor and cap screws
*Included with hydraulic ram.
CG405HYA
50-Ton Capacity (45.36 t) Combination 2 and 3 Jaw
Maximum Reach, Maximum Spread, Pressure Screw Jaw Thickness, Jaw Width, inches
Stock No.
inches (mm) inches (mm) outside Size, inches inches (mm) (mm)
CG560HY* 28 (711) 44 (1,118) 1-5/8–5-1/2 x 30 1-7/16 (36) 2 (51)
*Included with hydraulic ram
CG425HYA
CG560HY
PULLERS: BAR-TYPE MANUAL TAPPED HOLE SETS
6-Ton Capacity (5.41 t), Tapped Hole
Maximum
Stock No. Reach, inches Maximum Spread, Pressure Screw Side Side Rod Adaptors (2)
(mm) inches (mm) Rods (2)
2-5/8–11-5/8
CJ840C 33 (838) 1-14 x 30 5/8-18 1/2-20, 1/2-13, 3/4-16, 3/4-10
(67–295)
3/8ʺ-24, 3/8ʺ-16, 5/16ʺ-24,
Complete Puller Side rods in set are provided two each in 5” (CJ84-5), 10”
Set (CJ84A2) and 20” (CJ84-3) lengths 5/16ʺ-18, 7/16ʺ-20, 5/8ʺ-18,
5/8ʺ-11, 7/16ʺ-14
CJ840C CJ84C 33 (838) 1-14 x 33 5/8-18
Basic Puller Set 2-5/8 –11-5/8 1/2ʺ-20, 1/2ʺ-13, 5/8ʺ-18,
5/8ʺ-11, 3/4ʺ-16, 3/4ʺ-10
470
Snapon.com 1.877.762.7664
464-487 HT_Hand Tools_SO1500_19-0154.indd 470 12/10/19 5:21 PM