Page 463 - 实耐宝完整US版1500

PULLERS: AUTOMOTIVE

Steering Wheel Pullers
CJ134 Tilt Steering Pivot Pin Puller
• Allows efficient removal of the two pivot pins on all tilt steering columns
®
®
®
used on Chrysler , Ford and GM vehicles CJ134
CJ145 Steering Wheel Puller for CJ131P Steering Wheel Puller and
GM Vehicles Lock Plate Depressor Set
®
®
• Use on new GM steering wheels • Includes a selection of bolts and GENERAL
with air bags, including tilting and a handle in a storage case for
®
®
telescoping styles servicing GM , Ford , Chrysler CJ145
®
• Handle attachment facilitates puller and AMC vehicles
®
setup and can be removed when • Adaptors are included for servicing
®
®
working in confined areas lock plates on all GM and AMC
®
• Applications: Buick (1997 and vehicles with tilt wheel
®
later Park Avenue/Regal ), • Detachable handle helps hold the
Cadillac (1997 and later Catera), puller when turning force is applied
®
®
®
Chevrolet /GMC (1997 and later to the pressure screw
®
®
Corvette /Malibu , 1998 C and • Industrial finish
K series trucks, 1998 full size
®
vans, 1998 Astro/Safari vans),
®
Oldsmobile (1997 and later
Cutlass) and Pontiac (1988 1993 CJ131P
®
LeMans, 1997 and later Grand
®
Prix /Trans Sport van) HAND
Power Steering and Alternator Pullers/Single Pullers
CJ3PSA 3 pc Power Steering and Alternator Pulley Removal/
Installation Set
• Includes CJ113B, CJ117C, and CJ124A pullers
CJ124A Power Steering and Alternator Pulley Puller
• This is a larger version of CJ117C
®
®
• Designed for Chrysler , Ford and earlier GM vehicles
®
CJ122 2 pc Power Steering Pulley Installer Set CJ3PSA
• Includes installer and pulley installer shaft
• Thread size of 5/8ʺ-18UNF-2A (puller end) and 3/8ʺ 16UNC-2A (shaft end) TOOLS
CJ138 Installer, Pulley, M8 x 1.25
• 8 mm pulley installer features a black industrial finish and a thrust CJ124A
bearing for easier installation
• Applications: power steering pulley on Ford 4.6 L V8 (1991 and later),
®
Ford 2.5 L V6 (1995 and later) and the installation of water pump drive
®
®
®
pulleys on GM 4.6 L (1992 and later Oldsmobile Aurora)
CJ113B Pulley Installer, Power Steering/Alternator
(for domestic vehicles)
• Designed for US vehicles CJ122
• 1ʺ pulley driver hex, 7/16ʺ pressure screw hex, thread size of
5/8ʺ-18UNF-2A (puller end) and 3/8ʺ 16UNC-2A (shaft end)
• 4-5/8ʺ long
CJ147A Power Steering Gear Lower Pinion Bearing Puller CJ138
• Required tool to comply with GM recall bulletins #02049 and #03062
®
regarding power steering gear lower pinion bearing separation
• To correct the problem, inspect the condition of the lower pinion bearing
and replace the lower pinion bearing—in a few cases, replacement of the
rack and pinion steering gear assembly may be necessary—instructions CJ113B
included with tool
®
®
®
• Applications include Buick : Regal 1996–1998; Chevrolet : Cavalier
®
1996–1998, Lumina 1997–1998, Lumina APV 1996, Malibu 1997–1998,
®
Monte Carlo 1997–1998,Venture 1997–1998; Oldsmobile : Cutlass CJ147A
®
1997–1998, Cutlass Supreme 1996–1998, Silhouette 1996–1998,
®
®
Intrigue 1998; Pontiac : Grand Prix 1996–1998, Sunfire 1996–1998,
®
Trans Sport 1996–1998
• Screen puller application
• Inspect the puller, do not use damaged parts
• Use the proper type and size puller for the job 461
• ‡ These products can expose you to chemicals which are known to the state of California to cause
cancer and reproductive harm. See pages 906-907 for details.
• Read safety precautions on pages W1 to W4
443-463 HT_Hand Tools_SO1500_19-0154.indd 461 12/10/19 5:20 PM