Page 127 - 世霸SuperToolVol.6

HPC-N

D
■ HORIZONTAL LATERAL LIFTING CLAMP
D1
Features
● For lateral (horizontal) lifting of steel plates, flat steel
bars, H beams, etc.
T1
● With the spring mechanism, it is unnecessary to hold
the clamp after setting it onto the load. And when the
load lands on the floor, the initial clamp force assures
H LIFTING CLAMPS FOR STEEL
that the clamp does not come off.
● The clamp body can be easily checked for deformation
by measuring the safety points.
H1
Example of use Always lift a load at 2 or more points for safety.
Pull the
T When lifting
shackle Always insert within at 3 points,
upward the load 60° always lift
in the completely to from above
H2 direction of the end. the center
the arrows. of gravity of
the load.
L1 When lifting a long load, lift
HPC2N L within within at 4 or more points, and use a
60°
30° balance whenever possible. (for Vertical &
safe operation, the lifting angle lateral
clamp range of the sling ropes must be kept lifting clamps
within the specified angles.)
Rated Clamp range Size （mm） N.W.
Item No.
capacity （ton） （mm） L L1 H（MAX） H1 H2 D D1 T T1 （kg） Vertical
lifting clamps
HPC0.5N 0.5 0〜35 82.5 51.5 170 96.5 25 40 18 40 10 0.9
HPC1N 1 0〜40 98 59 204 117 32 50 23 51 13 1.8
HPC2N 2 0〜50 125 73 268 152.5 33 67 30 67 17 4.0
Lateral
HPC3N 3 0〜60 150 88 329 181 51 82 36 80 22 6.8 lifting clamps
HPC5N 5 0〜80 195 117 415 236 66 101 46 102 28 15
HHC Horizontal
lateral
roller diameter lifting clamps,
lifting hooks
■ LIFTING HOOK
Steel beam
Features lifting clamps
H ● Ideal for lifting and handling various steel structures.
● The roller at the head of the hook prevents from
damaging the wire rope.
Screw
● The sharp hook ends enable easy inserting into small cam clamps
clearance.
● The landing point designed slightly outside of the hook
H1
makes the remove operation very smooth. Beam
clamps,
● Safety points are marked on the body to prevent safety belt
clamps
L1 overload incident.
L
Example of use For safety, always use lifting hooks at 4 or more
HHC1 points in opposite positions. For steel beams, and Super foot
locks,
pipes, lift at 2 points positioned at both ends. lifting hooks
max. plate ＊ Always hang the wire rope as shown in the
thickness drawing below.
within within
60° within 60° Super lock
60° within hooks
set remove 60°
Drum lift
＊ Conduct daily inspection to confirm that all parts are functioning properly. clamps
landing point
Especially, always check carefully the use limit of the safety points.
Rated Size （mm） N.W.
Item No.
capacity （ton） Max. plate thickness L L1 H H1 T T1 Roller dia. (kg) Lifting hooks
for forklift,
HHC0.5 0.5 58 121 42 152 27 63 30 19 1.1 rail clamps
HHC1 1 65 144 47 178 33 80 40 23.5 2.1
HHC2 2 80 182 58 223 42 105 54 30 4.5
Reinforcing
HHC3 3 95 215 68 264 49 125 65 35 7.8 rod vertical
lifting clamps
HHC5 5 125 279 90 342 60 160 85 44 16.5
★The product parts list and operation manual can be downloaded from our website.
●For all the appendix, please refer to P.284〜286 125