Page 129 - 世霸SuperToolVol.6

SWC-S
L3 L2
■ SCREW CAM CLAMP
(Double Eye Type)
D
Twist Cam Type PAT.
H1
Features
H D ● All-purpose clamp that can be used for a variety of operations such
as lifting up and down, lateral pulling and turning over.
T1 LIFTING CLAMPS FOR STEEL
clamp ● Adequacy of tightening can be visually confi rmed by secure and
H2 range safe structure of the twist cam.
● When used in horizontal lifting, the screw is placed on top
S
(operator’s side), so the tightening operation can be done easily
L1 (when installing underneath a beam, the tightening can be done on
SWC1S L the operator’s side).
T1 ● The tightening mechanism with a screw and a circular cam (special
■ Tightening operation
T spring type) provides sure clamping force on a load even when the
load is landed or when vibrations occur during the lifting operation.
● The tightening check marks have phosphorescent (glow in the dark)
■ Visual safety check paint for easy visual recognition.
Accessories ● 17x21 Double Size Ratchet Wrench (Short Type) Vertical &
lateral
lifting clamps
Example of use Always lift a load at 2 or more points for safety.
Industry-fi rst. With a design unique among the conventional screw type clamps, the
screw tightening can always be done at the operator’s side.
Vertical
check marks are Tightening check marks lifting clamps
phosphorescent get aligned
circular cam screw check marks aligned the grip of the
circular cam gets
stronger
Lateral
lifting clamps
load load load
Before tightening After tightening When lifting
Horizontal
Rated Clamp Size （mm） N.W. lateral
Item No. lifting clamps,
capacity （ton） range （mm） L L1 L2 L3 H H1 H2 D T T1 S （kg） lifting hooks
SWC0.5S 0.5 0〜25 151.5 63 43.5 30 130 88 57.5 22 50 14 17 1.9
SWC1S 1 0〜40 191.5 84 51.5 40 164 120 72.5 26 61 16 21 3.5
Steel beam
SWC2S 2 0〜40 224.0 94 62.0 40 184 129 79.0 32 77 18 21 5.8 lifting clamps
Note : After having checked that the check marks are aligned, operate tightening over 25N・m (approx. 250kgf・cm).
L3 L2
SWC-N Screw
T1 cam clamps
D ■ SCREW CAM CLAMP (Double Eye Type) PAT.
H1
Beam
clamps,
H D S ＊ The features (except the twist cam with check marks) safety belt
clamps
and the examples of use are the same as SWC-S.
H2 clamp Accessories
range
● 17x21 Double Size Ratchet Wrench (Short Type) Super foot
T1 locks,
L1
lifting hooks
SWC1N L T
Rated Clamp Size（mm） N.W.
Item No.
capacity （ton） range （mm） L L1 L2 L3 H H1 H2 D T T1 S （kg） Super lock
hooks
SWC0.5N 0.5 0〜25 147 63 39 30 122 89 45 22 46 14 21 1.8
SWC1N 1 0〜40 185 84 45 40 156 121 58.5 26 50 16 21 3.2
SWC2N 2 0〜40 215 94 53 40 170 121 63.5 32 60 18 21 5.0
Drum lift
Note : For the torque value of the screw tightening, operate tightening over 25N・m (approx. 250kgf・cm). clamps
＊Common to all the screw cam clamps (SCC, SCC-W, SDC-S, SJC-S, SDC-N, SDC-WN, SJC, SUC, SWC-N, SSC-N, SWC-S).
●The clamp cannot be used for the load shapes described below.
Lifting hooks
DO NOT USE for forklift,
rail clamps
Cylinders
with inner Reinforcing
＊ Wedge ＊ Even with wedge shape under 8° , the Objects diameter rod vertical
shape clamp cannot be used if the clamp part Round Curved shape with with uneven under lifting clamps
over 8° has a taper in the lifting direction. bars radius under 300mm clamp part 600mm
★The product parts list and operation manual can be downloaded from our website.
●For all the appendix, please refer to P.284〜286 127