Page 782 - 实耐宝完整US版1500

ENGINE SERVICE: SERVICE TOOLS
EQUIPMENT

Seal Pullers
SPS2 ‡ Universal Seal Puller Set
• Small seal puller used for common seal sizes and large seal puller used
for larger seal sizes
• 2 and 4ʺ pins for various seal diameter sizes with clearance requirements
• Surface area on hook helps prevent seal puller from piercing through the
seal (0.25ʺ where competitive units are smaller at 0.12ʺ)
SPS2 • Pin creates a pivot point on the surface of the seal, thus distributing the
force evenly over a larger surface area when compared to a traditional
seal puller design

PCV/EVAP Tools
LDTBH5 5 pc PCV/EVAP Hose Release Tool Set
• Unique tools allow technicians to release breather hose connectors on
the vehicle with very little effort
• Compact size allows increased access for easy installation and removal,
saving the technician time
• Made of lightweight yet durable aluminum design
• Set includes (5) sizes, each in a different color for easier identification
LDTBH5-1 1-1/4ʺ PCV/EVAP Release Tool
SHOP LDTBH5 LDTBH5-4 5/8ʺ PCV/EVAP Release Tool
LDTBH5-2 1-1/8ʺ PCV/EVAP Release Tool
LDTBH5-3 15/16ʺ PCV/EVAP Release Tool
LDTBH5-5 1-1/2ʺ PCV/EVAP Release Tool

YA7200 YA8640

YA6760
YA9870
YA4590A
Specialty Tools
®
®
YA7200 ‡ 7/32ʺ 6-Point T20 TORX Bit 25° Offset Ford YA9870 Tension Pulley Spanner Wrench (Blue-Point )
®
®
Ignition Module Wrench (Blue-Point ) • Easily adjust camshaft spur belts having idler
®
®
®
• For 1982 and later Ford ignition modules pulleys with pin holes on Mitsubishi , Plymouth and
• Ratcheting ends are offset 25° Eagle vehicles
®
• One end has 7/32ʺ, 6-point; other end a T20 TORX bit • Protruding pins on the wrench grip the center of the idler
pulley and rotate it around its off center retaining bolt
YA8640 Cam Belt Wrench for VW /Audi Vehicles • Rotation allows for the camshaft spur belt
®
®
®
(Blue-Point ) tension adjustment
• For adjusting camshaft spur belts that have idler pulleys • Designed for use on: 1990–1993 Mitsubishi Eclipse ,
®
®
with pin holes Eagle Talon and Plymouth Laser 2.0 L DOHC (non-turbo);
• Vinyl handle grip 1990–1993 Plymouth Laser 2.0 L DOHC (turbo); 1990 and
®
®
YA6760 Timing Belt Pulley Holder for VW /Audi later Mitsubishi Eclipse and Eagle Talon 2.0 L DOHC
®
®
(Blue-Point ) (turbo); 1994–1996 Mitsubishi Montero 3.5 L DOHC;
®
®
®
®
• Holds crank pulley stationary for crank bolt removal and 1994 and later Mitsubishi Montero 3.5 L SOHC; 1994
®
®
installation to the factory torque requirement and later Mitsubishi Galant 2.4 L SOHC; and 1994 and
®
• Three-bolt design for secure holding later Mitsubishi Mirage ®
• 1/2ʺ drive for use with a breaker bar • 1.8 L SOHC vehicles
• Heat treated for strength with high-quality black finish YA4590A Hood Prop (Blue-Point )
®
®
• Applications: 1.8 L 4 cylinder turbo: VW and Audi • 3 pc telescoping shaft locks in any position
®
®
vehicles 1998–2006; 2.0 L 4 cylinder: VW vehicles • Range is 20ʺ–48-1/2ʺ
®
®
1993–2005; 2.0 L 4 cylinder turbo: VW and Audi • Will work on front or sides of any car or truck
vehicles 2006 and later • Made of steel tubing and features locking levers
on each section
• Includes holding support to prevent slippage
780 YA45904 Hood Prop Adaptor (Blue-Point )
®
Snapon.com 1.877.762.7664
774-794 ST_Shop Equipment_SO1500_19-0154.indd 780 12/11/19 10:22 AM