Page 455 - 实耐宝完整US版1500

EXTRACTORS: STUD REMOVERS

CG505 GENERAL

CG5151 CG5152 CG500-17
Stud Removers
• Tapered collets thread onto the stud, even if only a few threads are exposed
• Tightening the housing bolt draws the collet into the housing and clamps the
collet onto the stud
• Tools reduce the chance of damage to stud threads
• Avoid bottoming or shouldering the studs, shearing or damaging the stud or workpiece

Stud Remover Set Components Set CG5151 CG5152 CG505
Contains:
Stock No. Housing Stock No. Collet Size
CG500-4 CG500-2 1/4ʺ-28 • •
CG500-5 CG500-2 5/16ʺ-18 • •
CG500-6 CG500-2 5/16ʺ-24 • • HAND
CG500-7 CG500-2 3/8ʺ-16 • •
CG500-9 CG500-2 7/16ʺ-14 • •
CG500-11 CG500-2 1/2ʺ-13 • •
CG500-13 CG500-2 9/16ʺ-12 • •
CG500-15 CG500-2 5/8ʺ-11 • •
CG500-17 CG500-2 #10-24 •
CG500-18 CG500-2 #10-32 •
CG500H1 CG500-2 3/8ʺ Hex •
CG500H2 CG500-2 7/16ʺ Hex •
CG500H4 CG500-2 9/16ʺ Hex
CG505-3 CG505-1 7/8ʺ-9 •
CG505-4 CG505-1 1ʺ-8 •
CG505-5 CG505-1 3/4ʺ-16 TOOLS
CG505-6 CG505-1 7/8ʺ-14
CG505-7 CG505-1 1ʺ-14
CG505-8 CG505-1 11/16ʺ-16
CG505H2 CG505-1 11/16ʺ Hex
CG505H3 CG505-1 3/4ʺ Hex
CG505H4 CG505-1 13/16ʺ Hex
CG505H5 CG505-1 7/8ʺ Hex
CG508-2 CG508 1-1/8ʺ-12
CG508-4 CG508 1-1/4ʺ-12
CG508-5 CG508 1-3/8ʺ-6
CG508-6 CG508 1-3/8ʺ-12
CG508-9 CG508 1-1/8ʺ-8
CG508-11 CG508 1-3/8ʺ-8
CG508-12 CG508 1-1/2ʺ-8
CG500-30 CG500-2 M6-1.00 •
CG500-33 CG500-2 M7-1.00 •
CG500-36 CG500-2 M8-1.00 •
CG500-39 CG500-2 M9-1.00 •
CG500-40 CG500-2 M9-1.25 •
CG500-42 CG500-2 M10-1.25 •
CG500-48 CG500-2 M12-1.25 •
CG500-49 CG500-2 M12-1.50 •
CG500-54 CG500-2 M14-1.50 •
CG500-55 CG500-2 M14-2.00 •
CG500-60 CG500-2 M16-1.50 •
CG500-61 CG500-2 M16-2.00
CG500-2 CG500-2 Housing •
CG505-1 CG500-2 Housing •
453
• Read safety precautions on pages W1 to W4

443-463 HT_Hand Tools_SO1500_19-0154.indd 453 12/10/19 5:20 PM