Page 29 - Elpress英文样本电气连接压接系统

Hand tools for end terminals

Mechanical tools Miniforce type C has longer handles to Why certification?
facilitate two-handed operation, which is The certificate that accompanies the
In the development of a mechanical crim- often a simple and natural way to reduce tool serves several functions:
ping tool at Elpress, we strive for the best the loads. Electrical crimping tools and • crimping tools are often directly
quality and ergonomics in the actual tool, terminals together constitute a contact introduced upon procurement in a
and the best characteristics in the crim- crimping system where crimping results quality management system. The 02
ped terminal. The tools have a built-in are continuously checked against the
locking system (not the hobby tools) that requirements of established standards tool’s status at procurement shall
ensures that the entire crimping process such as IEC 60352-2, SEN 245010, DIN of course be the first thing noted, to
is completed - a prerequisite for professi- 46429, IEC 61238-1 etc. Many of the then be followed by regular checks
onal and quality-assured work. where potential changes can be
manual tools have symmetrical crimp po- discovered and addressed.
sitions that make it possible to work from
• the certificate shows that each indi-

both sides - something that is important vidual tool meets the requirements
for left-handed users. The tools in the Mi- of the tool’s basic specifications.
niforce, D and 50 series are made of very • the certificate states what the most
high-grade hardened steel with a black important characteristics are that
oxide finish and are laser marked. shall be followed up.
Elpress’ service department offers the

possibility of continued follow-up of

the quality of the tools.

Certification of crimping tools
For quality assurance of our tools, we
already certify the manufacture of our
crimping tools, both hand tools, type Gxx,
Elpress Mobile, professional tool with i.e. Miniforce tools, and type Dxx.
interchangeable dies for the installer or
service technician.
Miniforce-tools
With the unique Miniforce tools, a new
level has been established regarding er-
gonomic adaptation to the user and low
force requirements. This has resulted in a
decrease in the grip forces by up to 45%
and is the result of an advanced deve- Certificate that accompanies the tool.
lopment process where minimisation of
the risks of work-related injuries and the
best ergonomics have been the deciding Get your certificate.
factors.
What do we certify?

Certification of the crimping tools means
that each individual tool is documented
at the final assembly and inspection
stage with respect to:
• handle pre-load, which is the force
needed to ensure that the lock, which
prevents a crimp from being interrup-
ted, is not released too early.
• crimp die nest heights, i.e. the maxi-
mum height measurements which can
be measured in each indentation with
the dies pressed together.

Elpress ergonomic Miniforce tool.

2:3