Page 610 - Mahr马尔量具完整

MarShaft MAN

Measured Value Display MarCheck for MAN Shaft Measuring Instruments

DESCRIPTION

• MarCheck is a compact measur-
ing and evaluation unit for
manual MarShaft MAN shaft
measuring machines, featuring
intuitive controls and an excel-
lent range of functions.
• The minimal training input that is
required means that the instru-
ment can be used straight away,
saving time and money. The
large, easy-to-read monochrome
LCD display (240 x 160 dots) can
display up to three measuring
channels at the same time. The
individual measuring channels
are activated automatically on
the display when measuring with
the corresponding measuring
axis. The measuring direction is TECHNICAL DATA
displayed.
MarShaft MAN with MarCheck, measured value display for MAN shaft measuring instruments
• MarCheck comes as standard Measuring range length (Z) (mm) 400 / 800 / 1200 / 1600 / 2000 / 2400
with three measuring channels, Measuring range diameter (X) (mm) 120 or 220
for two linear measuring axes Workpiece weight (max.) in kg 20 / 60
(Z and X) and one rotational
measuring axis (C), which if Length/diameter resolution (mm) 0.0001
necessary can be reconfigured Angle resolution (°) 0.001
to a linear measuring axis (R). Length error limit (Z) (µm) (3 + L/100) µm, L (length) in mm
The precision measuring spindle Diameter error limit (X) (µm) (0.8 + L/100) µm, L (length) in mm
(C-axis) is controlled by Mar- Lens Optical measuring system (OMS) with matrix camera and software
Check and switched on and off
automatically for radial run-out
and roundness measurements.
Measuring and programming functions
Performance features • Evaluation of diameters, length dimensions, distances, taper, symmetry, center-to-center distance, roundness, axial
• Large, easy-to-read monochrome run-out, radial run-out, concentricity, workpiece axis datum calculation, maximum/minimum function, preset
LCD display (240 x 160 dots) function for datum points outside the workpiece.
with backlight • Teach-in programming, storage in MarCheck or on external PC or USB stick, printing to an external printer, inter-
• 3 measuring channels (Z-axis, nal storage of up to 40 measuring programs.
X-axis, and C-/R-axis)
• Numeral size approx. 13 mm
• 1 USB interface for max. 3 GB
USB stick
• 1 USB interface for PC (optional-
ly RS232 interface, data analysis
in Excel or MarCom software) or
software installation (updates)
• Can be connected to an inkjet
printer
• Roundness and radial run-out
measured with the DMS 120, no
additional R-axis required
• Automatic adoption of measur-
ing values on reaching the
non-user specific measuring
force
• Automatic adoption of calibra-
tion values from the individual
measuring modules

606 MarShaft | Shaft measuring instruments