Page 314 - HAZET英文2021

Pneumatic Tools

Impact wrench

9012 Impact wrench 9012 Impact wrench

• Loosening torque: 850 Nm C
/ 3 / 3
• Exhaust air is guided through the handle downwards
• Reduced vibrations
• Easy handling
• Powerful pin clutch mechanism
1
• Air connection inlet: inside thread (IG) 12.91 mm ( ⁄4″)
• Coupler plug: Nominal size 7.2 (included)
• Recommended torque: 550 Nm
• Hose diameter (recommended): 10 mm
• Working pressure (bar): 6.3 1 Ú Y ? ^ N 5 4
• Sound power level: 103.1 db(A) Lp W Nm Nm l/min. rpm db (A) LpA
• Vibration acceleration: 7.42 m/s 2 9012 EL-SPC 1700 1054 139 8000 98 1980 188444
• Loosening torque (max) Silicone protective cover for 9012 EL-SPC
determined with screw size M: 16 9012 EL-SPC-S – – – – – – 222520
• Forward and reverse: three-stage
(forward), single-stage (reverse)
• Cold insulated handle 9012 TT Twin Turbo impact wrench
• Enhanced power characteristics due to new, specially
developed air motor as well as efficient air guide • Loosening torque: 2200 Nm
and improved pull-up torque of the air motor 3
• Specially heat-treated inner parts for minimised wear • Exhaust air is guided through the handle downwards
• Ergonomically shaped handles and housing • Reduced vibrations
for improved handling and operation
• Easy handling
• Short design – only 128 mm
• HAZET Twin Turbo technology – high torques with compact design
• Innovative 8-blade air motor with 25% higher impact
performance ensures maximum torques
• One-hand operation for right and left-handed users
• Powerful twin hammer mechanism
• Air connection inlet: inside thread
(IG) 12.91 mm ( ⁄4″)
1
• Coupler plug: Nominal size 7.2 (included)
9012 SPC-S • Recommended torque: 948 Nm
• Hose diameter (recommended): 10 mm
• Working pressure (bar): 6.3
• Sound power level: 110.7 db(A) Lp W
• Vibration acceleration: 8.69 m/s 2
• Loosening torque (max) determined with screw size M: 16
• Forward and reverse: two-stage
(forward), single-stage (reverse)
• Cold insulated handle
1 Ú Y l/min. rpm db (A) LpA 5 4
N
^
?
Nm
Nm
9012 SPC 850 750 127.4 7000 92.1 2600 119639
Silicone protective cover for 9012 SPC ∙ 9012-1 SPC ∙ 9012 P-1
9012 SPC-S – – – – – – 222476
• Loosening torque: 1700 Nm
/ 3
• Exhaust air is guided through the handle downwards
• Reduced vibrations
• Easy handling
• Powerful twin hammer mechanism
• Air connection inlet: inside
1
thread (IG) 12.91 mm ( ⁄4″)
• Coupler plug: Nominal size 7.2 (included)
• Recommended torque: 881 Nm
• Hose diameter (recommended): 10 mm
• Working pressure (bar): 6.3
• Sound power level: 109 db(A) Lp W
• Vibration acceleration: 10.23 m/s 2
• Loosening torque (max) determined with screw size M: 16
• Forward and reverse: four-stage (counterclockwise
rotation), single-stage (clockwise rotation)
• Cold insulated handle
• One-hand operation by innovative
changeover on rear of device

1 Nm Y l/min. rpm db (A) LpA 5 4
N
Ú
^
?
Nm
9012 TT 2200 1356 147.2 8300 99.7 1600 226924
Low noise hose for noise reduction of the HAZET Twin Turbo impact wrenches
9012 MTT ∙ 9012 TT
Spring clamp for fixing the hose to the handle
9012 EL-SPC-S
B 9040-012 – – – – – – 232987
Components and spare parts from page 482 to 490 Valid until December 31, 2021 313