Page 412 - 日本前田TONE

&MFDUSJD UJSF XSFODI GFBUVSFT

Wheel nut tightening machine for tires ideal for large vehicles such as large buses and trucks.
Achieves high-precision torque control with automatic stop function.
By installing Digitorqon (sold separately), you can work while checking the tightening torque.

⁤
⤒ ⁡ ⁡

⁦ ⤒ ⁠ ⤔
⁤ ⁡ ⁢
5IF QJTUPM UZQF
8-90TWC68A
⁠ ⁥
⁢

⁥ ETW71CL ⁤ ⁦ ⤒ ⁠⁢ ⤕
⤓ 5IF TUSBJHIU UZQF
⁥ 8-90TWSA
1 Workability improvement. 5 Torque controller built-in 9 Can be used for deep 13 2 SPEED interchangeable

rims of rear tires.
Easy to control the torque of
Interchangeable between temporary
The torque controller is built
wheel nuts of large vehicles
tightening with a lever
such as trucks and buses. into the body, fit on the body. As the overall length of the tightening (hi-speed) and final
body is increased, it can also (8-90TW straight type only)
be used for deep rim rear
wheels. The sliding type
CW & CCW Automatic shut off reaction arm is easy to access
CW & CCW interchangeable to the nut.
2 with a switch handle while When target torque is reached,
6 it will shut off automatically.
containing same torque value.
Possible to achieve uniform Electric tire wrench exclusive
tightening regardless of the 14 foil nut combination socket
3 Torque accuracy The slide system Electroless plating.
operator.
Beautiful appearance, plating is
± 5 %
hard to peel.
Specially designed torque Double shape(hexagon/square) to
improve access to the nut.
controller achieves repeatable 7 Output square drive Epicyclic gearing
tightening accuracy within 25.4mm adopted
±5% of the target torque. Combination of compact body
TONE's dual opening impact
socket can be used. 10 and high power with epicyclic
gearing. Low-noise & vibration,
4 Easy torque setting making it user-friendly. Digitorqon compatible
&%
&% -
high-precision torque control 8 JIS and ISO supported Resin protector 15 Digitorqon can be attached which
Adjust the dial scale to set
torque. (However, the scale of
can display the tightening torque
the dial is only a guide. If
JIS (6 & 8 holes) and new ISO
Resin protector will not
tightening work.
is required, please check the (8 & 10 holes) supported by 11 damage the wheel or wheel (sold separately) for secure
tightening torque.) only exchanging output unit nut.
and reaction arm.
12 Balancer compatible
(Only the 8-90TW straight type
Cup system Lever system Lever system is standard adoption.) 5VSO UP 1 GPS NPSF JOGPSNBUJPO %5 585
4VQQPSU ZPVS BDUJWJUZ JO TVDI B QMBDF
Ideal for legal inspection and maintenance of wheel nuts
for large vehicles such as trucks and buses.
Convenient tool for truck/bus dealers, maintenance shops, tire shops,
truck/ bus operators, etc.

※ "Digitorqon" is a registered trademark of TONE Corporation.
410