Page 121 - 世霸SuperToolVol.6

SVC-E

■ VERTICAL LIFTING CLAMP
D
(Lock Handle Type with Universal
Shackle)
D1
Cam, pad cross type, normal pitch

Features

● For vertical lifting of steel plates and other steel LIFTING CLAMPS FOR STEEL

structures, with more lifting directions possible and
light-weight type.
● The spring-type tightening lock mechanism assures a
positive initial clamp force.

H UNIVERSAL SHACKLE TYPE

H1

H4
The universal shackle allows the cam to
H3 Vertical &
generate a clamping force on the load at lateral
H2 lifting clamps
any direction it is pulled.
Vertical
lifting clamps
L1 L2 TIGHTENING AND RELEASING LOCK MECHANISM
SVC1E
L
Lateral
T1
lifting clamps
T3
Horizontal
lateral
lifting clamps,
lifting hooks

Steel beam
lifting clamps
lock handle lock handle
■ Tightening lock mechanism ■ Releasing lock mechanism
When you pull upward the lock When you pull downward the lock Screw
cam clamps
handle, the lock gets set and the handle, the lock gets released.
clamp grips firmly the workpiece. Never attempt a lifting operation in
This lock is very safe and even if this state. It would be dangerous as
T2
the sling rope loosens, or if a shock the tightening would be insufficient. Beam
T occurs, the clamp will not come off. clamps,
safety belt
clamps
Example of use Always lift a load at 2 or more points for safety.
Super foot
■ Steel plate ■ Steel beam ■ Steel plate ■ Pipe lifting locks,
vertical lifting lifting turning-over lifting hooks

Cam, pad : cross type, within When lifting a pipe,
60°
normal pitch (P=3.0) position the clamps Super lock
hooks
so that they face
each other as shown
on the drawing. (the
lifting angle of the
Drum lift
sling rope must be clamps
kept within 60° .)
Rated Clamp Size（mm） N.W.
Item No.
capacity （ton） range （mm） L L1 L2 H（MAX） H1 H2 H3 H4 D D1 T T1 T2 T3 （kg） Lifting hooks
for forklift,
SVC0.3E 0.3 0〜16 100 25 19 176 110 57 48 30 45 26 50 39 36 8 1.6 rail clamps
SVC0.5E 0.5 0〜19 110 28 22 204 125 67 53 34 52 30 55.5 45 40 10 2.1
SVC1E 1 0〜25 130 35 29 257 160 80 60 38 60 35 67.5 53 48 12 3.7
Reinforcing
SVC1.5E 1.5 0〜28 150 39 33 290 174 88 67 42 76 45 76.5 67 55 14 5.5 rod vertical
lifting clamps
SVC2E 2 0〜32 162 43 37 335 194 97 73 45 94 55 82 83 58 16 7
★The product parts list and operation manual can be downloaded from our website.
●For all the appendix, please refer to P.284〜286 119