Page 118 - 世霸SuperToolVol.6
P. 118
CLAMP USE CHART Compliant item Item that can be used
SVC− HLC− HLC− SWC− SDC−
GVC−R （H/HN/WH/ GVC-E （H/HN/ HLC−U HPC−N (S/W) HHC (S/N) (S/N/WN) SJC−(S) SSC−N SUC SCC/−W
WHN/E/L） WH/WHN）
Page number P.117 P.118〜121 P.122 P.123 P.124 P.125 P.126 P.125 P.127 P.128 P.129 P.130 P.130 P.131
Vertical
lifting
Lateral
Lifting
lifting
Steel plate
turning-over
Steel beam
Usage
turning-over
LIFTING CLAMPS FOR STEEL
Horizontal
pulling
Hoist, chain
block hanging
Vertical & Steel plate
lateral
lifting clamps (vertical lifting)(lateral lifting)
Vertical Steel plate
lifting clamps
Lateral ＊Check carefully the sling rope lifting angle during lifting. The clamp cannot be used if the lifting angle exceeds the limit mentioned in the operation manual available on our website.
lifting clamps
Horizontal
lateral
lifting clamps,
lifting hooks
Steel beam H shaped steel beam
lifting clamps
＊Check carefully the sling rope lifting angle during lifting. The clamp cannot be used if the lifting angle exceeds the limit mentioned in the operation manual available on our website.
Screw
cam clamps Work
Beam
clamps,
safety belt
clamps
Super foot steel beam I shaped
locks,
lifting hooks
Super lock steel beam U shaped
hooks
Drum lift steel beam Angle ＊Check carefully the sling rope lifting angle during lifting. The clamp cannot be used if the lifting angle exceeds the limit mentioned in the operation manual available on our website.
clamps Pipe
Lifting hooks (vertical lifting)(lateral lifting)
for forklift,
rail clamps Pipe
Reinforcing
rod vertical Note 1 : For the steel beam, the longer side must be in horizontal position.
lifting clamps
Note 2 : For the ▲ marks (item that can be used), please refer to the operation manual.
Note 3 : For details, please refer to the operation manual of each clamp, available on our website.
★The product parts list and operation manual can be downloaded from our website.
116 ●For all the appendix, please refer to P.284〜286
