Page 845 - 实耐宝完整US版1500

PARTS WASHERS: AQUEOUS BASED SHOP

PBC3022 PBC33B PBC42B CLEANING

Electric/Medium-Duty

Specifications PBC3022 PBC33B PBC42B
Depth, inches (mm) 22 (559) 28 (711) 24 (610)
Reservoir Capacity, gal 6 20 12
Electrical Requirements 115 V AC, 20 A 120 V AC, 60 Hz 230 V AC, 60 Hz
Pump Motor, HP — — 3/4
Output Pressure, PSI 50 50 500
Volume, gallons per hour 325 325 180
Heater, watts 1,500 1,500 1,500
Open Height, inches 32 65 69
Inside Dimensions, inches 17 W x 12 D x 14 H 21 W x 31-1/2 D x 10 H 40 W x 24 D x 16–24 H
Overall Dimensions, inches 30 W x 22 D x 32 H 37 W x 28 D x 42 H 44 W x 24 D x 65 H
European Models: PBCH33B-EUR† (230 V AC, 50 Hz), PBCH42B-EUR† (230 V AC, 50 Hz), PBCH57AEUR† (230 V AC, 50 Hz)
†
PBC3022 Heated Aqueous Parts Washer PBC33B Heated Aqueous Parts Washer
• Compact design is portable and can be moved to the • Clean parts with a flexible pressurized cleaning spout
job site easily • Solution is heated for additional cleaning effectiveness
• Sealed lid prevents splashing when used on mobile • Easily accessible polysateen drain filter to remove solids
service vehicles • Heavy-wall polyethylene tub and solid base is durable
• Heavy plastic body and lid are produced with for heavier parts
high-density polyethylene • Integral oil skimmer removes oil and grease from the
• Stainless steel mesh work surface for durability cleaning solution to maximize cleaning effectiveness
and strength • Clean parts with less effort—the solution works
• Heating element increases cleaning effectiveness and effectively by relieving surface tension of the grime
is thermostatically controlled • Cleaning solution lasts longer, which minimizes solution
• Features a 5-micron filter to separate out dirt and debris changes by not absorbing oil and dirt
• Cleaning solution carries a licensed Green Seal
®
Certification Mark and is certified by the South Coast Air
Quality Management Distribution
• Carries the highest environmental certifications, which
lessens the environmental impact taking care of our
land, water and air resources
• Low solution warning indicator
• Includes (5) gallons of PBA733 Cleaning Solution and
(1) gallon of PBA734 Cleaning Concentrate Booster
PBC42B High-Pressure Parts Washer
• Fully enclosed aqueous parts washer
• Blast parts clean with a 500 PSI high-pressure wand
• Soap solution is heated for additional effectiveness
• Automatic soak cycle loosens grime

• Do not direct air or fluid stream at body • Do not use washer without fusible link or 843
• Do not expose solvent to flames, sparks or safety valve intact
other source of ignition • Read safety precautions on pages W1 to W4
• Use in well ventilated area

841-850 ST_Shop Cleaning_SO1500_19-0154.indd 843 12/10/19 4:56 PM