Page 191 - Mahr马尔量具完整

MarCator

Dial Indicator

Order no. Scale Mounting Order no. Scale Mounting
diameter shaft diameter shaft
inch inch inch inch
[ 25.4 ]
1.00
12.7 2011157 2.25” .375” 2014811 2.25” .375”
.50
2011158 2.25” .375” 2015787 2.25” .375”
2011161 2.25” .375” 2014812 2.25” .375”
BK– 2093
2011162 2.25” .375” 2015790 2.25” .375”
2015781 2.25” .375” 2014814 2.25” .375”
2014761 2.25” .375” 2015785 2.25” .375”
[6.4]
.25 [6.4]
.25
2015782 2.25” .375” 2014809 2.25” .375”
[17.5] [17.5]
.69 .69 2014791 2.25” .375” 2015789 2.25” .375”
[12.7] [12.7]*
.50 .50
2015783 2.25” .375” 2014813 2.25” .375”
6.4 6.4
.25 .25 2014808 2.25” .375” 2015791 2.25” .375”
BK– 2168 BK– 383
2015784 2.25” .375” 2014815 2.25” .375”
2014810 2.25” .375” 2015792 2.25” .375”
2015786 2.25” .375” 2011049 2.25” .375”
[12.7]
.50
[17.5]
ACCESSORIES
6.9
6.4
.25 Order no. Product name Product type ANSI/
AGD
Group
[6.4]
.25
BK– 400 BK– 470
2014804 Magnetic maximum hand w/snap on bezel (option) 2
2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201843 Adaptor Bushing 0.275” ID to 0.375” OD AD– 58
[3.2]
.125 2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
[12.7]
.50
[22.2]
.875 2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
2203133 Mounting bracket with adjusting knob for AGD 2 AT– 116 2
[12.7]
[31.8] .50 [17.5] .69
2203163 Brake attachment, dust cap mount (option), range limited to 6.35 mm/ .250” AT– 81
1.25
for group 1 and to 12 mm/ .500” for group 2– 4 indicators
[6.4] 1/4-20 Thr'd
.25 1/4-28 Thr'd 2203184 Brake attachment (option) AT-A– 7-W2 2
BK– 531 BK– 692
2204603 Base for indicators with lug back BA– 1051
2204772 Post back 1/2” Dia. BK– 2093 2
2204773 Vertical lug, offset 1/4” hole BK– 2168 2
2204780 Vertical lug back, centered 1/4” hole BK– 383 2
2204782 Horizontal lug back, centered, 1/4” hole BK– 400 2
2204786 Flat back for AGD 2 BK– 470 2
2204790 Adjustable back 1/4– 20 thread BK– 531 2
HD– 57 2204802 Screw type back 1/4– 28 BK– 692 2
HG– 100 2204812 Rack back used on AT– 116 and AT– 28 BK– 93 2
2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
2205222 Tolerance hands w/snap on bezel (option) BZ– 2503 2
LR– 46; LR– 48 2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
AD– 138
2219994 Rubber bellows for shank Ø .375” GU– 2
2220154 Tolerance hands w/screw on bezel (option) HD– 57 2
2220177 Protective housing for AGD 2 models with rangers up to 6.35 mm/ .250” HG– 100 2
2220178 Protective housing for AGD 2 models with rangers up to 25 mm/ 1” HG– 101 2
2220539 OX-bow lifting lever LR– 40
2220544 Lifting lever to lift probe manually (left) LR– 48 2
BU– 80 15.9 2220545 Lifting lever to lift probe manually (right) LR– 49 2
9.5 .63
.375 Flats
I.D 2235806 Tap 1/2 – 32 V– 892
Collet Nut
NT-99
24.6
.97
Approx. Collet-Bushing
7.1 AD-88
.28
1/2-32 Thr'd
AD– 87
57.2
2.25
Dr. and C'sink for
3/16 scr. - 2 Holes
20.6
14.5 1/4-28 Thr'd .81
.57 .63 16
79.4 88.9
3.13 3.50
16
.63
88.900
3.5000
BA– 1051
MarCator | Dial and Digital Indicators 187