Page 187 - Mahr马尔量具完整

MarCator

Dial Indicator

Order no. Scale diameter Mounting shaft
inch inch
[6.4]
[6.4] .25
.25
2011000 1.75” .375”
[17.5] [17.5]
.69 .69
[12.7]* [12.7] 2011001 1.75” .375”
.50 .50
2011004 1.75” .375”
6.4 6.4
.25 .25 2011005 1.75” .375”
BK– 1600 BK– 1601
2011106 1.75” .375”
2011107 1.75” .375”
2011110 1.75” .375”
2011111 1.75” .375”
[25.4]
1.00 2011118
[12.7] 1.75” .375”
.50
2011119 1.75” .375”
2011123 1.75” .375”
BK– 1634 BK– 1660 2011124 1.75” .375”
2011133 1.75” .375”
2011134 1.75” .375”
[12.7]
.50
2011114 1.75” .375”
[17.5] 6.9
2011115 1.75” .375”
6.4
[12.7] .25
.50 [17.5] 2011128 1.75” .375”
.69
2011129 1.75” .375”
[6.4]
1/4-28 Thr'd .25 2011137 1.75” .375”
BK– 1661 BK– 19
2011138 1.75” .375”
2011141 1.75” .375”
2011142 1.75” .375”
ACCESSORIES
Order no. Product name Product type ANSI/
AGD
Group
LR– 46; LR– 48 AD– 138
2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
15.9
9.5 .63 2203132 Mounting bracket with adjusting knob AT– 115 1
.375 Flats
I.D
Collet Nut 2203155 Mounting bracket with hex socket adjust AT– 27 1
NT-99
24.6
.97 2203163 Brake attachment, dust cap mount (option), range limited to 6.35 mm/ .250” AT– 81
Approx. Collet-Bushing
7.1
.28 AD-88 for group 1 and to 12 mm/ .500” for group 2– 4 indicators
1/2-32 Thr'd
2203183 Brake attachment (option) AT-A– 7-W1 1
AD– 87 BU– 80 2204603 Base for indicators with lug back BA– 1051
2204756 Vertical lug back, centered, 1/4” hole BK– 1600 1
2204757 Vertical lug back, offset, 1/4” hole BK– 1601 1
57.2
2.25
2204758 Adjustable back 1/4”– 20 thread BK– 1633 1
Dr. and C'sink for
3/16 scr. - 2 Holes
2204759 Post back 1/2” BK– 1634 1
20.6
14.5 1/4-28 Thr'd 16 .81
.57 .63
79.4 88.9 2204760 Flat back BK– 1660 1
3.13 3.50
16
.63 88.900
3.5000 2204761 Screw type back 1/4– 28 BK– 1661 1
BA– 1051 2204771 Horizontal lug back 1/4” hole BK– 19 1
2204811 Rack back used on AT– 27 and AT– 115 BK– 92 1
2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
2205127 Split bushing with shoulder 8 mm stem hole X .375” OD BU– 197
2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
2219994 Rubber bellows for shank Ø .375” GU– 2
2220156 Tolerance hands w/screw on bezel (option) HD– 59 1
2220539 OX-bow lifting lever LR– 40
2220542 Lifting lever, left hand LR– 46 1
2220543 Lifting lever, right hand LR– 47 1
2235806 Tap 1/2 – 32 V– 892
MarCator | Dial and Digital Indicators 183