Page 193 - Mahr马尔量具完整

MarCator P1/2I / P1/2I-RC / P1I / P1I-RC / 23I /

23IM-RC / 26I / 26IM-RC / 28IM / 28IM-RC

Dial Indicator

Order no. Scale diameter Mounting shaft E
mm inch 19.1
.75
6.4 AGD 6.4 .25
2011810 57 .375” AGD .25 AGD
2011812 57 .375” C AGD
A
2011815 57 .375”
12.7
2011817 57 .375” .50 *
B
2015793 57 .375” AGD D .375" or 8 mm
AGD
2014817 57 .375”
#4-48 Thr'd
AGD
6.4
2015794 57 .375” Range AGD
.25
AGD
2014818 57 .375”
2015795 57 .375”
2014819 57 .375”
ACCESSORIES
Order no. Product name Product type ANSI/
[ 25.4 ] AGD
1.00
12.7
.50 Group

BK– 2093; 2014804 Magnetic maximum hand w/snap on bezel (option) 2
BK– 664; BK– 17 2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
2203133 Mounting bracket with adjusting knob for AGD 2 AT– 116 2
[6.4]
.25 [6.4]
.25
2203156 Mounting bracket with hex socket adjustable AT– 28 2
[17.5] [17.5]
.69 .69
[12.7] [12.7]* 2203163 Brake attachment, dust cap mount (option), range limited to 6.35 mm/ .250” AT– 81
.50 .50
for group 1 and to 12 mm/ .500” for group 2– 4 indicators
6.4 6.4
.25 .25 2203184 Brake attachment (option) AT-A– 7-W2 2
BK– 1601; BK– 1600; 2204603 Base for indicators with lug back BA– 1051
BK– 2168; BK– 383; 2204772 Post back 1/2” Dia. BK– 2093 2
BK– 545; BK– 4 BK– 431; BK– 3
2204773 Vertical lug, offset 1/4” hole BK– 2168 2
2204780 Vertical lug back, centered 1/4” hole BK– 383 2
[12.7]
.50
[17.5] 6.9 2204782 Horizontal lug back, centered, 1/4” hole BK– 400 2
2204786 Flat back for AGD 2 BK– 470 2
6.4
.25 2204790 Adjustable back 1/4– 20 thread BK– 531 2
2204802 Screw type back 1/4– 28 BK– 692 2
2204812 Rack back used on AT– 116 and AT– 28 BK– 93 2
[6.4]
.25
BK– 19; BK– 32; 2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
BK– 400; BK– 470; 2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
BK– 109 BK– 473; BK– 5
2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
2205222 Tolerance hands w/snap on bezel (option) BZ– 2503 2
[3.2]
.125
[12.7] 2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
.50
[22.2]
.875
2219994 Rubber bellows for shank Ø .375” GU– 2
[12.7] 2220154 Tolerance hands w/screw on bezel (option) HD– 57 2
.50
[31.8] [17.5] .69
1.25
2220177 Protective housing for AGD 2 models with rangers up to 6.35 mm/ .250” HG– 100 2
[6.4] 1/4-20 Thr'd 2220178 Protective housing for AGD 2 models with rangers up to 25 mm/ 1” HG– 101 2
.25 1/4-28 Thr'd
BK– 531; BK– 1661; 2220539 OX-bow lifting lever LR– 40
BK– 10; BK– 18 BK– 692; 2220544 Lifting lever to lift probe manually (left) LR– 48 2
BK– 177; BK– 16
2220545 Lifting lever to lift probe manually (right) LR– 49 2
2235806 Tap 1/2 – 32 V– 892
57.2
15.9 2.25
9.5 .63
.375 Flats
I.D
Dr. and C'sink for
3/16 scr. - 2 Holes
Collet Nut
NT-99 20.6
24.6 14.5 .57 1/4-28 Thr'd 16 .81
.97 .63
Approx. 79.4 88.9
7.1 Collet-Bushing 3.13 3.50
.28 AD-88
16
1/2-32 Thr'd .63 88.900
3.5000
HD– 57;HD– 53 HG– 100 LR– 46; LR– 48; AD– 138 AD– 87 BU– 80 BA– 1051
LR– 50; LR– 68
MarCator | Dial and Digital Indicators 189