Page 197 - Mahr马尔量具完整

MarCator

Dial Indicator

[3.2]
.125 Order no. Scale diameter Mounting shaft Order no. Scale diameter Mounting shaft
[12.7]
.50
[22.2]
.875 inch inch inch inch
2011226 2.75” .375” 2011250 2.75” .375”
[31.8]
1.25
2011227 2.75” .375” 2011251 2.75” .375”
[6.4] 1/4-20 Thr'd 2011050 2.75” .375” 2011258 2.75” .375”
.25
BK– 10 2011051 2.75” .375” 2011259 2.75” .375”
2011054 2.75” .375” 2011238 2.75” .375”
2011055 2.75” .375” 2011239 2.75” .375”
[12.7]
.50 2011230 2.75” .375” 2011254 2.75” .375”
[17.5]
6.9
2011231 2.75” .375” 2011255 2.75” .375”
6.4 2011242 2.75” .375” 2011262 2.75” .375”
.25 [12.7] [17.5]
.50
.69
2011243 2.75” .375” 2011263 2.75” .375”
2011234 2.75” .375”
[6.4] 1/4-28 Thr'd 2011266 2.75” .375”
.25
BK– 109 BK– 177 2011235 2.75” .375” 2011267 2.75” .375”
2011246 2.75” .375”
2011247 2.75” .375”
[6.4]
.25
[17.5]
.69
[12.7]*
.50
6.4
.25
BK– 431 BK– 473
[6.4]
.25
ACCESSORIES
[17.5] [ 25.4 ]
.69 1.00
12.7
[12.7] .50
.50
Order no. Product name Product type ANSI/
6.4
.25 AGD
BK– 545 BK– 664 Group

2011341 Magnetic maximum hand (option) 3
2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
2203163 Brake attachment, dust cap mount (option), range limited to 6.35 mm/ .250” AT– 81
for group 1 and to 12 mm/ .500” for group 2– 4 indicators
2203185 Brake attachment (option) AT-A– 7-W3 3
LR– 50; LR– 68 AD– 138
2204603 Base for indicators with lug back BA– 1051
2204730 Adjustable back with 1/4– 20 thread BK– 10 3
2204734 Horizontal lug back, centered BK– 109 3
2204763 Screw type back 1/4– 28 BK– 177 3
2204784 Vertical lug back, centered BK– 431 3
2204787 Flat back BK– 473 3
2204791 Vertical lug back, offset BK– 545 3
BU– 80 2204799 Post back 1/2” dia. BK– 664 3
2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
2205127 Split bushing with shoulder 8 mm stem hole X .375” OD BU– 197
15.9
9.5 .63 2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
.375 Flats
I.D
Collet Nut 2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
NT-99
24.6
.97
Approx. Collet-Bushing 2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
7.1 AD-88
.28
1/2-32 Thr'd 2219994 Rubber bellows for shank Ø .375” GU– 2
AD– 87 2220539 OX-bow lifting lever LR– 40
2220546 Lifting lever to lift probe manually (left) LR– 50 3
2220547 Lifting lever to lift probe manually (right) LR– 51 3
57.2
2.25
Dr. and C'sink for 2235806 Tap 1/2 – 32 V– 892
3/16 scr. - 2 Holes
20.6
1/4-28 Thr'd .81
14.5 16
.57 .63
79.4 88.9
3.13 3.50
16
.63
88.900
3.5000
BA– 1051
MarCator | Dial and Digital Indicators 193