Page 201 - Mahr马尔量具完整

ACCESSORIES

Order no. Product name Type ANSI/
AGD
Group

2011341 Magnetic maximum hand (option) 2011341 3
2014804 Magnetic maximum hand w/snap on bezel (option) 2014804 2
[12.7] [ 25.4 ]
.50 [17.5] 1.00
.69 12.7
.50 2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
1/4-28 Thr'd
BK– 692; BK– 664 2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
BK– 177 2203133 Mounting bracket with adjusting knob for AGD 2 AT– 116 2
2203156 Mounting bracket with hex socket adjustable AT– 28 2
[3.2]
.125 2203163 Brake attachment, dust cap mount (option), range limited to 2235806 AT– 81
[12.7]
.50
[22.2] Tap 1/2 – 32/ .250” for group 1 and to 12 mm/ .500” for group 2– 4 indicators
.875 [6.4]
.25
2203184 Brake attachment (option) AT-A– 7-W2 2
[17.5]
[31.8] .69 2203185 Brake attachment (option) AT-A– 7-W3 3
1.25 [12.7]*
.50
2204603 Base for indicators with lug back BA– 1051
[6.4] 1/4-20 Thr'd 6.4
.25 .25 2204730 Adjustable back with 1/4– 20 thread BK– 10 3
BK– 531; BK– 10 BK– 383;
BK– 431 2204734 Horizontal lug back, centered BK– 109 3
2204763 Screw type back 1/4– 28 BK– 177 3
2204772 Post back 1/2” dia. BK– 2093 2
2204773 Vertical lug, offset 1/4” hole BK– 2168 2
2204780 Vertical lug back, centered 1/4” hole BK– 383 2
[6.4]
.25
2204782 Horizontal lug back, centered, 1/4” hole BK– 400 2
[17.5]
.69
[12.7] 2204784 Vertical lug back, centered BK– 431 3
.50
2204786 Flat back for AGD 2 BK– 470 2
6.4
.25
BK– 2168; BK– 470; 2204787 Flat back BK– 473 3
BK– 545 BK– 473 2204790 Adjustable back 1/4– 20 thread BK– 531 2
2204791 Vertical lug back, offset BK– 545 3
2204799 Post back 1/2” dia. BK– 664 3
2204802 Screw type back 1/4– 28 BK– 692 2
2204812 Rack back used on AT– 116 and AT– 28 BK– 93 2
2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
2205127 Split bushing with shoulder 8 mm stem hole X .375” OD BU– 197
HD– 57;HD– 53 LR– 48; LR– 50 2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
2205222 Tolerance hands w/snap on bezel (option) BZ– 2503 2
[12.7] 2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
.50
[17.5]
2219994 Rubber bellows for shank Ø .375” GU– 2
6.9
2220154 Tolerance hands w/screw on bezel (option) HD– 57 2
6.4
.25
2220177 Protective housing for AGD 2 models with rangers up to 6.35 mm/ .250” HG– 100 2
2220178 Protective housing for AGD 2 models with rangers up to 25 mm/ 1” HG– 101 2
[6.4] .25
AD– 138 BK– 400; 2220539 OX-bow lifting lever LR– 40
BK– 109 2220544 Lifting lever to lift probe manually (left) LR– 48 2
2220545 Lifting lever to lift probe manually (right) LR– 49 2
15.9
9.5 .63 2220546 Lifting lever to lift probe manually (left) LR– 50 3
.375 Flats
I.D
2220547 Lifting lever to lift probe manually (right) LR– 51 3
Collet Nut
NT-99
24.6
.97 2235806 Tap 1/2 – 32 V– 892
Approx. Collet-Bushing
7.1 AD-88
.28
1/2-32 Thr'd
BU– 80 AD– 87
57.2
2.25
Dr. and C'sink for
3/16 scr. - 2 Holes
20.6
1/4-28 Thr'd .81
14.5
.57 16
.63
79.4 88.9
3.13 3.50
16
.63
88.900
3.5000
BK– 400; BA– 1051
BK– 109
HG– 100
MarCator | Dial and Digital Indicators 197