Page 203 - Mahr马尔量具完整

ACCESSORIES

Order no. Product name Product type ANSI/
[ 25.4 ]
1.00 12.7 AGD
.50
Group

BK– 2093; 2011341 Magnetic maximum hand (option) 3
BK– 664 2014804 Magnetic maximum hand w/snap on bezel (option) 2
2201801 Adaptor for inductive probes for use on dial indicators (AGD) AD– 138
2201846 Threaded bushing .625” long .500” OD with 5/16– 32 internal thread AD– 62
[6.4]
.25 [6.4]
.25 2201854 Split collet OD is 17.45 mm/ .687”; requires 1/2– 32 threaded hole AD– 87
[17.5] [17.5]
.69 .69 2203133 Mounting bracket with adjusting knob for AGD 2 AT– 116 2
[12.7] [12.7]*
2203156 Mounting bracket with hex socket adjustable AT– 28 2
.50 .50
6.4 6.4
.25 .25 2203163 Brake attachment, dust cap mount (option), range limited to 6.35 mm/ .250” AT– 81
BK– 2168; BK– 383; for group 1 and to 12 mm/ .500” for group 2– 4 indicators
BK– 545 BK– 431 2203184 Brake attachment (option) AT-A– 7-W2 2
2203185 Brake attachment (option) AT-A– 7-W3 3
2204603 Base for indicators with lug back BA– 1051
[12.7]
.50 2204730 Adjustable back with 1/4– 20 thread BK– 10 3
[17.5]
6.9
2204734 Horizontal lug back, centered BK– 109 3
2204763 Screw type back 1/4– 28 BK– 177 3
6.4
.25
2204772 Post back 1/2” dia. BK– 2093 2
[6.4] 2204773 Vertical lug, offset 1/4” hole BK– 2168 2
.25
BK– 400; BK– 470; 2204780 Vertical lug back, centered 1/4” hole BK– 383 2
BK– 109 BK– 473 2204782 Horizontal lug back, centered, 1/4” hole BK– 400 2
2204784 Vertical lug back, centered BK– 431 3
2204786 Flat back for AGD 2 BK– 470 2
[3.2]
.125
[12.7] 2204787 Flat back BK– 473 3
.50
[22.2]
.875
2204790 Adjustable back 1/4– 20 thread BK– 531 2
[12.7] 2204791 Vertical lug back, offset BK– 545 3
[31.8] .50 [17.5] .69
1.25
2204799 Post back 1/2” dia. BK– 664 3
[6.4] 1/4-20 Thr'd
.25 1/4-28 Thr'd 2204802 Screw type back 1/4– 28 BK– 692 2
BK– 531; BK– 10 BK– 692; 2204812 Rack back used on AT– 116 and AT– 28 BK– 93 2
BK– 177 2205081 Split bushing, for use with protective housing .375” stem hole X .687” OD BU– 111
2205127 Split bushing with shoulder 8 mm stem hole X .375” OD BU– 197
2205195 Split bushing, with counterbore, .375” stem hole x .500” OD BU– 80
2205200 Split bushing without counterbore, .375” stem hole x .50” OD BU– 94
2205222 Tolerance hands w/snap on bezel (option) BZ– 2503 2
2206230 Rane limiting caps, adjustable up to 9.52 mm / .375” CS– 123
2219994 Rubber bellows for shank Ø .375” GU– 2
2220154 Tolerance hands w/screw on bezel (option) HD– 57 2
HD– 57;HD– 53 HG– 100
2220177 Protective housing for AGD 2 models with rangers up to 6.35 mm/ .250” HG– 100 2
2220178 Protective housing for AGD 2 models with rangers up to 25 mm/ 1” HG– 101 2
2220539 OX-bow lifting lever LR– 40
2220544 Lifting lever to lift probe manually (left) LR– 48 2
2220545 Lifting lever to lift probe manually (right) LR– 49 2
2220546 Lifting lever to lift probe manually (left) LR– 50 3
2220547 Lifting lever to lift probe manually (right) LR– 51 3
LR– 48; LR– 50 AD– 138
2235806 Tap 1/2 – 32 V– 892
15.9
9.5 .63
.375 Flats
I.D
Collet Nut
NT-99
24.6
.97
Approx.
7.1 Collet-Bushing
.28 AD-88
1/2-32 Thr'd
AD– 87 BU– 80
57.2
2.25
Dr. and C'sink for
3/16 scr. - 2 Holes
20.6
1/4-28 Thr'd .81
14.5 16
.57 .63
79.4 88.9
3.13 3.50
16
.63
88.900
3.5000
BA– 1051
MarCator | Dial and Digital Indicators 199