Page 386 - 日本前田TONE

'PS TBGFUZ VTF

For safety use, please read the following attentions carefully before using tools.

WARNING

˔ The plastic handle is not insulated. Do not cut the energized wire.
(pliers, combination pliers, diagonal cutting pliers and cutters)

˔ Use safety goggles to protect eyes from scattering chips when cutting steel,
copper and other wires. (pliers, lineman's pliers, diagonal cutting pliers and

cutters)

CAUTION
ADJUSTABLE WRENCH / PLIERS
˔ Please use tools in original purposes. fig.1
UVSO BOUJ DMPDLXJTF
EJSFDUJPO
˔ Turn adjustable wrench in the direction of lower jaw. If wrench is turned in the
opposite direction, lower jaw may receive excessive force and break down. (fig.1)

˔ The gap between bolt/nut and adjustable wrench makes wrench slip. fig.2
Worn out bolt/nut let wrench slip too, please be careful. (fig.2)

˔ Adjustable wrench slips when using at slant angle against bolt/nut. (fig.3)
fig.3
˔ Please do not insert extension pipe into the handle of the adjustable wrench,
the large force may break the wrench. (fig.4)
fig.4
˔ Please do not hit the grip by hammer.
fig.5
˔ If combination pliers is used to turn bolt / nut of larger size,
top of jaws will open and cannot grip parallel. (fig.6)

˔ Adjust position of fixing screw to make handle opened adequately. (fig.7) fig.6

˔ Beware not to pinch hand / finger. Hold the center of grip.
(pliers, lineman's pliers, diagonal cutting pliers and cutters) fig.7

˔ Do not bend needle nose pliers as nose is made long and thin.

˔ Read instruction manual carefully before using ratchet cable cutter. (fig.8)
fig.8
˔ Cutting capacity of ratchet cable cutter : IV, CV, DV, VVR soft copper wire 600v (fig.9)

˔ For both ratchet cable and handy cable cutter can not cut hard copper wire.
(aluminum conductor steel-reinforced cable(ACSR), steel wire and piano wire)
fig.9
˔ Do not apply excessive force when turning, twisting or pushing aside the cutter.
Wrong use might damage cutting blade of trap cutter or tube cutter.
7ɾ$7ɾ773 $7ɾ773
TJOHMF DPSF DPSF
˔ When using trap cutter or tube cutter, store round-cutter blade beforehand to
protect fingers from injury. (fig.10)

˔ Handle carefully when using trap cutter or tube cutter.
fig.10
˔ For both trap cutter and tube cutter, please be careful when cutting and
replacing blades.

384