Page 621 - 蓝带金统立KINGTONY2025年样本

UNDERCAR SERIES

Pneumatic Dent Puller Slide Hammer
Bodywork Puller Set
9CH212
• With 3 LB ( 1.36 kgs ) sliding hammer 9CH01
• With brass valve and 1/4" air plug
• With 13" length inlet hose • 6 lbs / 2.7 kgs slide hammer with 540 mm shaft make
• With 2 PC. pads ( 120mm , 150mm ) more powerful
• Air exhaust from the handle • Variety attachment adaptor suitable for different
• Working pressure 90 PSI situation
• 1/4'' european • Use for vehicle body panel and chassis or other metal
distortion etc.
Kg 3.5 1/4
Kg 8.50 1/2

CONTENTS:
• 1 PC. 540 mm handle shaft
• 1 PC. 6 lbs / 2.7 kgs hammer
• 1 PC. Large curve hook
• 1 PC. Small curve hook
• 1 PC. Large 90˚ hook
• 1 PC. Small 90˚ hook
Bodywork File & Set • 1 PC. Flat squashed attachment
• 1 PC. Straight attachment
• 1 PC. Double attachment
9CM01 • 1 PC. Tapping screw
• 1 PC. Hook attachment with chain
• Used for sheet-metal working
• Suitable for flat and curved surfaces
• Double-sides file with radial shape
• Lightweight aluminium body
• 1 PC. file included

Putty Knife

9CJ1112 1-1/4"

9CM11 L

9CM209
0.2 A
Teeth Length
KT NO. Version inch mm g A L g
9CM01 rough 8 355 1580 1 / 20 KT NO. inch mm inch mm
9CJ1112 1-1/4 32 8-1/2 218 60.0 24 / 144
9CM2
• Used for sheet-metal working 9CJ1120 2"
• Suitable for flat and curved surfaces L
• Double-sides file with radial shape
• For 9CM11
0.5 A

A
L
KT NO. Version Teeth Length g KT NO. inch mm inch mm g
inch
mm
9CM209 rough 8 355 330 1 / 50 9CJ1120 2 50 8-1/2 218 70.0 24 / 144
9CM212 fine 12 355 330 1 / 50
580