Page 276 - 世霸SuperToolVol.6

SMGB-T

■ MAGNET BAR, STANDARD TYPE
(Permanent Magnet Ferrite)

Features
● Single unit that can be set freely, like in grate shape, allowing a
large range of application.
● The waterproof structure enabled by special welding allows the use
inside liquids.
● Required length, diameter, magnetic force available upon request.
● Can be used efficiently in front of discharge filter.
■ Pipe surface
● Material : SUS304
● Surface finish : Buff #200 finish
MAGNETIC SEPARATION
● Environment temperature : ≦80℃
● Surface max. magnetic flux density : 0.18T（1,800G） Applications
● Inner permanent magnet characteristic value : 0.32T（3,200G）
● Both end tapping holes : M6×8 ● Ideal for iron removal inside powder, granular or liquid raw material.
＊ Without tapping hole also available ● Removal of iron powder in food, pharmaceutical, chemical
upon request. production lines.
Pipeφ25×length N.W. Pipeφ25×length N.W.
Item No. Item No.
（mm） （kg） （mm） （kg）
SMGB10T 100 0.32 SMGB40T 400 0.97
Magnets
SMGB15T 150 0.4 SMGB45T 450 1.06
SMGB20T 200 0.52 SMGB50T 500 1.18
SMGB25T 250 0.65 SMGB55T 550 1.3
SMGB30T 300 0.73 SMGB60T 600 1.43
Magnetic
sludge SMGB35T 350 0.85
strainers,
magnetic
bars,
magnetic
pen bars

■ Magnet flat frame
● Material : SUS304
■ Magnet flat frame T H
T D ● Finish : Pickling
● Material : SUS304
● Finish : Pickling SMGPK L
SMGPM ■ GRATE MAGNET FOR RESIN
■ GRATE MAGNET FOR RESIN MOLDING MACHINE (Square-shaped)
MOLDING MACHINE (Round-shaped)
Features
Features ● Attached to a square-shaped hopper, the strong magnets displayed
in grid catch fine iron powder during the fall of pellet shape or
● Attached to a round-shaped hopper, the strong magnets displayed
granular raw material.
in grid catch fine iron powder during the fall of pellet shape or
● Can also be designed and manufactured according to an existing
granular raw material.
hopper.
● Can also be designed and manufactured according to an existing
● Heat resistant type also available upon request.
hopper.
● Sizes out of the size table below also available upon request.
● Heat resistant type also available upon request.
● Sizes out of the size table below also available upon request. ● Environment temperature : ≦80℃
● Surface max. magnetic flux density : 0.4T（4,000G）
● Environment temperature : ≦80℃
● Surface max. magnetic flux density : 0.4T（4,000G）
Size （mm） Number of Pipe dia.
Item No.
Size （mm） Number of Pipe dia. L H T magnets (mm)
Item No.
D T magnets (mm) SMGPK150 150 150 50 3
SMGPM200 φ200 50 4 SMGPK200 200 200 50 4
SMGPM250 φ250 50 5 SMGPK250 250 250 50 5 φ22
φ22
SMGPM300 φ300 50 6 SMGPK300 300 300 50 6 SUS304
SUS304
SMGPM350 φ350 50 7 SMGPK350 350 350 50 7
SMGPM400 φ400 50 8 SMGPK400 400 400 50 8
＊ 0.8T (8,000G), 0.6T (6,000G) also available upon request. ＊ 0.8T (8,000G), 0.6T (6,000G) also available upon request.
＊ 1.0T (10,000G), φ25 diameter design also available upon request. ＊ 1.0T (10,000G), φ25 diameter design also available upon request.
274