Page 913 - 实耐宝完整US版1500

Sockets, Power Tire Changers Welders, Cutters Electric, Plasma

• Power sockets or accessories can break • Electric welding or plasma cutting
if used on impact drivers • Tires can explode causes ultraviolet rays, localized
Wear safety goggles Wear safety goggles. magnetic fields, sparks, weld spatter
(user and bystanders). Do not over-pressurize tire, use the and hazardous vapors and may cause
Do not use power sockets or accessories inflation-limiting feature on the tire electrical shock
with impact drivers. changer. • Bystanders will be exposed
Broken tools can cause injury. Do not mismatch tires and rims. Wear welding helmet with appropriate
• Holding a rotating tool can cause Read and follow all safety precautions shade lens while welding or cutting.
entanglement in user’s manual Wear gloves and protective clothing.
Rotating power tools can cause injury. Exploding tire can cause serious injury. Use only in well-ventilated area.
Do not allow bystanders in area while
welding or cutting.
Striking and Struck Tools, Tool Storage Units Do not operate this equipment if you
have an implanted electromechanical
Punches/Chisels device.
Never coil electrode/torch lead around
• Storage units can tip or strike you your body.
Do not open more than one loaded Read and follow all safety precautions
• Striking and struck tools can break drawer at a time. in instructions.
or chip Keep children away. Ultraviolet rays will burn eyes, magnetic
• Chipped or mushroomed punch and Close lid and lock drawers and field may affect operation of medical
chisel ends or metal weakened by doors before moving. devices. Weld spatter, electrical shock or
improper grinding can fragment Apply brakes on locking casters sparks can cause burns or other injuries.
• Oversized hammer can chip the punch when not moving unit.
or chisel Do not step in or on drawers.
Wear safety goggles Units to be used on level ground only. Gas, Welding and Plasma Cutting
(user and bystanders). Secure units together with fasteners.
Do not use punch or chisel having Read and follow instruction manual
mushroomed ends; dress edges or Tipping of storage unit or unit striking you
mushroomed ends to original shape can cause injury. • Welding and cutting produce heat, weld
with a hand file. • Units edges can cut or pinch spatter and hazardous vapors
Do not misuse a chisel as a punch. Do not pull; push to move. Wear gloves, face shield and
Do not use chisels on bearings or other Wear gloves when lifting by edges. protective clothing.
items that are harder than the chisel. Keep feet and fingers clear of Use only in well-ventilated area.
Hammer head diameter should be edges when stacking, hanging or Do not allow bystanders in
approximately 3/8" larger than head of moving units. immediate area.
punch or chisel. Unit edges can cause injury. Read and follow all safety precautions
Flying objects can cause injury. in instructions.
• Steel punches and chisels can cause Byproducts of welding or cutting can
sparks during use Torque Sticks cause burns or other bodily injuries.
Do not use near flammable substance.
Flammable substances can ignite
causing injury. Wheel Alignment Tools
• The actual torque delivered to a fastener
by a torque stick or torque extension
Hammers depends on proper usage.
Read and follow all instructions. • Suspension springs can slip out of
Check final torque with a torque wrench engagement with spring compressors
Improper torque can cause fastener Follow instruction and assure that
• Hammers can cause flying chips. loosening or breakage resulting in injury. spring is properly engaged with
• Chipped, mushroomed or cracked the compressor.
hammers can cause flying chips Wear safety goggles
• Glancing blows can cause flying chips Torque Testers (user and bystanders).
• Striking hard surface can cause • WA92 can break or disengage from
flying chips spring if torqued over 30 lb ft
• Body hammers can chip or break if Do not torque WA92 over 30 lb-ft
struck against hard surfaces • Calibration weights can cause tester Broken compressor or disengaged spring
Wear safety goggles and its base to tip. can cause injury.
(user and bystanders). Wear safety goggles
Do not use chipped, mushroomed (user and bystanders).
or cracked hammers. Counterbalance or anchor Wheel Balancers
Strike squarely and avoid mounting base.
glancing blows. Tipping base can cause injury.
Do not strike other hammers or similar
hard surfaces. • Misuse of wheel balancer can result
Do not use hammer for removing ball Torque Wrenches in accidents
joints, use appropriate tool. Do not disable or by-pass the hood
Use body hammers only for striking safety interlock system.
automotive-type sheet metal; do not Do not use on wet surfaces or
strike hard surfaces. • Overtorquing can cause breakage below grade.
Flying chips can cause injury. • Wrench can break while breaking Read and follow all instructions.
• Steel hammers can cause sparks fasteners loose Personal injury can result from
during use • Force against flex stops on flex improper use.
Do not use near flammable substance. head torque wrenches can cause Improperly balanced tires can cause
Flammable substances can ignite head breakage vehicle accidents.
causing injury. • An out-of-calibration torque wrench can
®
• COMPOTHANE or urethane hammers cause part or tool breakage
can rupture or ignite if exposed to Wear safety goggles Wrenches
liquid oxygen (user and bystanders).
Do not use COMPOTHANE or urethane Do not exceed rated torque.
hammers near liquid oxygen. Do not use a torque wrench to break • Excess force can cause crowfoot or flare
Ruptured and/or ignited COMPOTHANE or fasteners loose. nut wrench slippage
urethane can cause injury. Do not force head of flex head torque • Wrenches can break if overloaded
wrenches against stops.
Periodic recalibration is necessary • Slimline wrenches have limited
to maintain accuracy. torque strength
Broken tools can cause injury. Wear safety goggles
(user and bystanders).
Do not use “cheater bars” on
any wrench.
Use only moderate force on crowfoot,
flare nut and slimline wrenches.
Broken or slipping wrenches can
cause injury.
• User can fall if fastener suddenly breaks
loose or wrench jaw slips or breaks W4
Pull, do not push, on wrench handle.
Injury can occur if user loses balance.
W1-W4_Warning_SO1500_19-0154.indd 4 12/16/19 3:00 PM