Page 911 - 实耐宝完整US版1500

Adaptors Compressors Geared Head
Torque Multipliers
• Adaptors can break from over-torque • Air compressors have electrical parts,
Do not use with impact drivers. moving parts and contain high pressure
Do not exceed the torque stamped air that may be impure • Use of gear head torque multipliers for
on adaptor. Read and follow all instructions. torque control may result in inaccurate
Broken adaptor can cause injury. Do not use as an air supply for breathing. torque application
Improper use or maintenance can cause For accurate control of torque use an
®
®
shocks, entanglement or injury. Electrotork , a Torqometer or other
Battery Chargers, Testers (AVR), • Compressor systems contain air under measuring device located directly on
the fastener.
Portable Booster Packs pressure which can create a high pressure Limited accuracy of the torque ratio of a
stream or ruptured vessel
Wear safety goggles geared head torque multiplier may cause
(user and bystanders). improper preload of the fastener if it is
used for torque control.
• Batteries produce explosive gases and Relieve pressure before servicing.
can explode Do not modify/repair/rework pressure
Wear safety goggles vessel or change safety relief Grinders, Grinding Wheels,
(user and bystanders). pressure setting.
Read and follow all safety precautions A pressurized air stream or rupturing Power Tool Accessories
accompanying the product. pressure vessel can cause injury. (drill bits, wire brushes, grinding burrs, abrasive
Do not overcharge battery. • Moving components inside wheels, grinding wheels, valve grinders, valve
Keep flames and sparks away Do not use without all guards in place. grinding wheels)
from batteries. Moving components can cause injury.
Do not expose batteries of Booster • High voltage will create an electrical shock
Pack to liquids. Disconnect all power before servicing. • Grinding causes flying particles
• Sparks occur when connecting or High voltage can cause injury. • Power tool accessories can break
disconnecting leads while charger is ON Wear safety goggles
Charger must be OFF when connecting (user and bystanders).
or disconnecting leads. Cordless Tools Do not operate without eyeshields,
Do not allow leads on Booster Packs guards and holders in place.
to contact each other. Do not use power tool accessories
Battery explosion or ignited gases can at speeds faster than their maximum
cause injury. • Battery packs present a risk of fire,
explosion and electric shock rated RPM.
Charge battery pack only with Do not use any accessory not
Blow Guns charger provided. specifically intended for use with
Do not store battery packs at a die grinder, with a die grinder.
temperatures above 120 ˚F (49 ˚C). Flying particles and broken tools can
Do not discard used batteries; return cause injury.
• Blow guns create flying particles, noise them to a Snap-on repair center • Wire bristles can break and fly off
®
and high velocity air for recycling. Wear safety goggles
Wear safety shield or goggles Follow all safety messages in (user and bystanders).
(user and bystanders). user’s manual. Flying particles can cause injury.
Wear mask if air is dusty Do not expose battery pack to liquids. • Force on the side of grinding wheels
(user and bystanders). Fire or explosion or electric shock can or discs can break them
Wear hearing protection cause injury. Do not grind on the side of a grinding
(user and bystanders). • Sparks from electric motor can ignite an wheel or disc.
Do not direct air at yourself atmosphere containing flammable vapor Broken grinding wheel or disc can
or bystanders. Do not use cordless tools in a volatile cause injury.
Keep out of reach of children. atmosphere
VENTED: Do not use if air supply is above Fire and/or explosion can cause
135 psig. Do not obstruct vents. serious injury. Hammers
NON-VENTED: Do not use if air supply is (See Striking and Struck Tools)
above 30 psig.
Flying particles, noise and high velocity Diagnostic Equipment
air can cause injury.
Hand Tools
Handles
Brake Tools • Use of diagnostic equipment on rotating
engine poses risk of flying particles and
entanglement
Wear safety goggles. • Handles can break if overloaded
• Brake cylinder hones can fly apart if Use caution in routing cables. Do not use “cheater bars” on handles.
used outside cylinder Flying particles can cause injury. Pull, do not push, on handles.
Wear safety goggles Poorly routed cables and test leads can Broken handle or a fall can cause injury.
(user and bystanders). cause entanglement and injury.
Operate only while hone is • Use of diagnostic equipment can cause
within cylinder. electrical shock, fire and explosion. Sockets, Accessories
Flying parts can cause injury. Use caution and proper procedures when
connecting and disconnecting leads.
Diagnostic equipment must be located
Butane Mini-Torches 18" or more above floor level. • Sockets and accessories can break
Avoid sparks and other sources if used with an impact wrench
of ignition. Do not use chrome or industrial finish
• Butane can explode Electrical shock, flames and explosion can hand tools with impact drivers.
Store at a temperature below 120 °F. cause serious injury. Broken sockets or accessories can
Dispose of butane in accordance • Improper use can cause hazardous cause injury.
with regulations. conditions
Explosion or flames can cause injury. Read and follow all safety precautions
accompanying the product. Impact Wrenches
Unexpected electrical, thermal or
mechanical occurrences can cause injury.
• Impact wrenches produce noise
Fuel System Tools and vibration
Wear appropriate ear protection
and gloves.
Extended exposure to noise and vibration
• Flammable liquid and fumes can ignite can cause injury or impairment
Wear safety shield (user and bystanders). • Impact wrenches can cause breakage
Use only in well-ventilated areas. of sockets or accessories
Flames or explosion can cause injury. Wear safety goggles
(user and bystanders).
Flying particles can cause injury.
W2
W1-W4_Warning_SO1500_19-0154.indd 2 12/11/19 12:23 PM