Page 912 - 实耐宝完整US版1500

Knives Power Tools Punches/Chisels
(impact wrenches, ratchets, hammers, sanders, (See Striking and Struck Tools)
grinders, cut-off tools)
• Blades are sharp and can cut
• Blades can break causing flying objects Ratchets
Wear safety goggles • Power tools can cause flying particles
(user and bystanders). Wear safety goggles
Do not pry or bend blade. (user and bystanders).
Keep away from children. Flying particles can cause injury. • Ratchet mechanism may slip or break
Make sure that the blade locking • Power tools generate noise if dirty or worn
device is securely engaged before using Wear hearing protection • Mismatched or partially worn parts can
the knife. (user and bystanders). cause ratchet to slip or break
Sharp edges and flying objects can Prolonged exposure to noise can cause Frequently inspect, clean and lubricate
cause injury. hearing loss. all non-sealed ratchet mechanisms with
• Power tools vibrate light oil.
Avoid prolonged exposure to vibration. Do not immerse sealed ratchet in fluids.
Leak Detectors Prolonged exposure to vibration can Do not replace worn parts individually,
cause injury. use entire contents of the service kit.
• Improper use of power tools and Ratchets that slip or break can
accessories can cause broken tools cause injury.
• Gases, fluids or accumulated fumes may Do not use without all guards in place.
explode or ignite Use accessories rated at tool RPM
Do not expose fluids or fumes to flames, or higher. Sanders
sparks or other sources of ignition. Read and follow instructions before
Wear safety goggles or safety shield. using power tools.
Use only in well-ventilated areas. Broken tools can cause injury.
Explosion or flames can cause injury. • Sanding disc or accessories can break if
Fumes can cause breathing difficulty. used above maximum rated RPM.
Pressure Equipment and Do not use sanding discs or accessories
Lift Equipment Jacks, Jack Stands Pressure Gauges above their maximum rated RPM.
Broken sanding disc or accessories can
(all equipment using pressurized air cause injury.
or hydraulic fluid such as tanks, spray • Sanding produces particles and dust
• Vehicles supported by jacks or jack guns and blow guns) Wear safety goggle or a safety shield.
stands may fall if used improperly Wear a dust mask or respirator.
Do not exceed rated capacity of jack or Some dust created by sanding may
jack stand. contain chemicals known to produce
Do not work on vehicle supported by • Pressurized equipment, systems or cancer or other health concerns.
jack, use jack stands; use jack stands tanks can break or leak • Misuse of grinding wheels on sanders
in pairs. Do not exceed the maximum pressure may result in wheel breakage.
Use jack and jack stands only on hard rating of equipment. Do not use grinding wheels on sanders.
level surface. Wear safety goggles or shield Broken grinding wheels can cause
Lift and support vehicle only on its and protective clothing appropriate serious injury.
designated lift points. to the fluid.
Failure of jack or jack stand or falling of Pressurized fluid striking the body can
vehicle can cause serious injury or death. cause personal injury. Flammable fluids Scrapers
such as gasoline, propane, etc. can ignite
or explode and cause injury.
Lifts, Hoists • Fluids can leak or escape • Scrapers and putty knives can break if
Use only in well-ventilated areas.
Breathing vapors or fluids from leaks can used for prying or chiseling
cause illness or injury. Wear safety goggles
• Vehicles supported on lifts or hoists may • Pressurized air or fluid stream can (user and bystanders).
fall if lifts are improperly installed, used propel dust or particles Do not use a scraper or putty knife
or maintained Do not direct air or fluid stream at your as a prybar or chisel.
Do not exceed rated capacity of the lift. body or at others. Broken tools can cause injury.
Lift must support vehicle only on its Flying particles, air or fluid entering body
designated lift points. can cause injury.
Lifts must be installed by qualified • Improper use or maintenance of Screwdrivers
installer. pressurized equipment can cause
Lifts must be inspected and maintained leaks or rupture
in accordance with user’s manual. Read and follow instructions. • Screwdrivers can break if used as
Follow all instructions for proper Leaking of pressurized equipment can prybar, chisel or punch
use and all safety messages in cause injury. Wear safety goggles
user’s manual. (user and bystanders).
Failure of the lift or vehicle falling off of Do not use a screwdriver as a prybar,
lift due to use of improper lift points can Prybars chisel or punch.
cause serious injury or death. Broken screwdriver can cause injury.
• Plastic screwdriver handles do not
• Prying can cause flying chips. provide electrical insulation
Lighting Chipped or cracked prybars can cause Do not use on or near live electrical
flying chips circuits.
• Prybars can chip if struck Electrical shock can cause injury.
Wear safety goggles
• Electrical shock can result from absence (user and bystanders).
of grounding prong Do not use pipe or lever extension.
Do not remove or bypass the Do not use a prybar if chipped Socket Usage
grounding prong in any electrical plug. or cracked. Select the proper type of socket for
Disconnect power before servicing. Do not use a prybar as a punch the application.
Electrical shock can cause injury. or hammer. • Hand Sockets – All chrome-plated
Flying chips can cause injury. sockets and black finished sockets
Pliers/Cutters identified as hand sockets are for hand
use only
• Power Sockets – Sockets designed
Pullers, Presses and intended for use with power nut
runners; do not use with impact drivers
• Broken tips or cut material can fly
Wear safety goggles • Impact Sockets – Sockets designed
(user and bystanders). • Puller or press parts under stress for durability when used with impact
Flying material can cause injury. can break drivers; use only impact sockets with
impact drivers
Wear safety goggles • Flexible sockets can cause injury when
(user and bystanders). used with impact or power drivers.
Use the proper type and size puller Do not hold flexible sockets or swivel
or press. joint tools during use.
Inspect the puller, do not use puller Rotating socket can cause hand injury.
with worn or broken parts.
Screen the puller or press operation.
W3 Broken parts can cause injury.
Snapon.com 1.877.762.7664
W1-W4_Warning_SO1500_19-0154.indd 3 12/16/19 3:00 PM