Page 804 - 实耐宝完整US版1500

MEASURING: STRAIGHT EDGES AND STEEL RULES
EQUIPMENT

RULER6 RULER12 RULER120 RULER600

Steel Rules RULER601 RULER602 RULERF6 RULERF12
RULER6 6ʺ Steel Rule RULER120 US/Metric Steel Rule RULERF6 Chrome 6ʺ Flexible Rule
• Graduations in 1/8ʺ, 1/16ʺ, 1/32ʺ • 12ʺ stainless steel rule • 6ʺ full flexible steel ruler with satin
and 1/64ʺ • 1/32ʺ increments for first 3ʺ, 1/16ʺ chrome finish
• Spring-tempered steel increments for last 9ʺ • Rules with single row of inch
• Non-glare satin chrome finish • Metric edge is etched with mm figures (all rules under 1ʺ width)
• Deep, black-filled, chemical machined and cm increments • 1/2ʺ wide ruler with 1/64ʺ
graduations that will last a lifetime RULER600 Steel Rule thickness
• Quick reading, end graduations • 6ʺ Eng Ruler RULERF12 Chrome 12ʺ Flexible Rule
• Ruler measures edge-to-edge • Graduated in 1/32ʺ and • 12ʺ fully flexible steel ruler with a
• Fits in the user’s pocket 1/64ʺ increments satin chrome finish
RULERF12 Chrome 12ʺ Flexible Rule RULER601 6ʺ Steel Rule • Lengths include 1/8ʺ, 1/16ʺ,
• 12ʺ fully flexible steel ruler with a (Blue-Point ) quick-reading 1/32ʺ and 1/64ʺ
®
satin chrome finish • 6ʺ stainless steel rule • 1/2ʺ wide ruler with 1/64ʺ
• Lengths include 1/8ʺ, 1/16ʺ, quick- • Graduated in 1/10ʺ and 1/50ʺ thickness
reading 1/32ʺ and 1/64ʺ increments on one side, 1/32ʺ • Rules with a double row of inch
• 1/2ʺ wide ruler with 1/64ʺ thickness and mm increments on the other figures, and each edge represents
• Rules with a double row of inch the bottom edge reading left to
figures, and each edge represents RULER602 6ʺ SAE/Metric Pocket Rule right (rules 1ʺ and wider)
the bottom edge reading left to right • 6ʺ stainless steel rule with pocket clip
• 1/32ʺ and 1/64ʺ increments on one side,
SHOP TAPE RULES Tape Rules TPMA25 25ʹ Tape Rule
(rules 1ʺ and wider)
mm and cm increments on the other

TPMA10 10ʹ Tape Rule
• 1ʺ x 25ʹ tape
• 1/2ʺ x 10ʹ tape
• Includes SAE scale with 16ʺ
• Includes SAE/metric scale
stud markings
with fractions
TPMA10
TPMA25
TPMA12
TPMA12 12ʹ Tape Rule
• 19 mm x 5 m tape
• 3/4ʺ x 12ʹ tape TPMAM5 5 m Tape Rule
• Includes SAE scale with 16ʺ • Includes metric scale
stud markings TPMA25EM 25ʹ Tape Rule
• 1ʺ x 25ʹ/7 m tape
• Includes SAE/metric scale
TPMAM5 TPMA25EM with fractions
Tape Rules
TPM100 Tape Rule (Blue-Point )
®
• Includes inch/metric scale
• Quick rewind design for ease of use
• Rewinding lever conveniently stored in housing
TPM100 • Nonslip grip provides confidence and comfort
MIRRORS/PICK-UP TOOLS
GA265A
UPTC16LT
Claws (Flexible) YA837A GA353B DPTC24 UPTC16MLT
Maximum Jaw Opening, Flexible Section Length,
Stock No. No. of Claws Overall Length, inches
inches inches
GA265A 2 1 8 17-3/4
YA837A 4 3/4 16 23-1/2
GA353B 4 1 8 17-1/2
DPTC24 4 1-1/4 24 24-1/2
UPTC16LT 4 — 16-3/4 —
UPTC16MLT* 4 — 16-3/4 —
*Lighted
UPTC16MLT Lighted Flexible Spring Claw (Blue-Point )
®
• Magnet is able to pick up a maximum of 5 lb • Tightly wound flexible spring snakes into tight areas
• Four-jaw claw opens wide to secure hard to reach objects • Includes (2) CR2032 lithium batteries
• Heavy-duty aluminum plunger with convenient side • 25-11/16ʺ long
802
switch turns on/off bright LED Light as needed
Snapon.com 1.877.762.7664

795-815 ST_Shop Equipment_SO1500_19-0154.indd 802 12/10/19 4:54 PM