Page 407 - 实耐宝完整US版1500

NON-CONDUCTIVE COMPOSITE TOOLS

Screwdrivers (Soft Grip Handle)
• Slim tip design accesses fasteners in tight areas faster and easier
• No conductive path to user PLIERS
• No insulation to puncture, tear or wear through
®
®
®
• Exceeds ANSI , ISO and ASME strength and performance requirements
for standard steel tools
• Every tool is individually tested to protect up to 1,000 V AC and 1,500 V DC CNSGDX60
®
®
• Snap-on non-conductive tools are UL listed, assuring compliance to
®
IEC 60900 Set CNSGDX60
• US Patent #6,655,240 B1 Contains:
Stock No. Tip Size Shank Length, inches Length, inches
Flat Tip CNSGDF66 3/16 6 11-1/2 •
CNSGDF68 1/4 6 11-1/2 •
CNSGDF69 9/32 6 11-1/2 •
®
Phillips Tip CNSGDP61 #1 6 11-1/2 •
CNSGDP62 #2 6 11-1/2 •
CNSGDP63 #3 6 11-1/2 •

IHTS6

Screwdrivers (Screwdriver Handle)
• No conductive path to user IHTP62
• No insulation to puncture, tear or wear through
• Every tool is individually tested to protect up to 1,000
V AC and 1,500 V DC IHT60K
Set IHT60K
• U.S. Patent 5,259,277 Contains:
Shank Length,
Stock No. Tip Size Length, inches Replacement Bit
inches
Flat Tip IHTS3 3/16 3-1/4 8-3/16 IHTS65 •
IHTS37 7/32 3-1/4 8-3/16 IHTS37-5
IHTS38 1/4 3-1/4 8-3/16 IHTS685
IHTS6 1/4 6 11 IHTS685 •
IHTS610 5/16 6 11 IHTS6105
IHTS9 5/16 9 14 IHTS6105 •
IHTS912 3/8 9 14 IHTS912-5
Phillips Tip IHTP31 #1 3-1/4 8-3/16 IHTP315 •
®
IHTP62 #2 6 11 IHTP625
IHTP63 #3 6 11 IHTP635 •

Screw Starters and Screwdriver Shanks
• No conductive path to user CSSC9
• No insulation to puncture, tear or wear through
• Every tool is individually tested to protect up to 1,000 V AC and 1,500 V DC SGDMRC4-C6
®
®
®
• Snap-on non-conductive tools are UL listed, assuring compliance to IEC 60900
Handle Diameter,
Stock No. Handle Type Tip Style Tip Width Size Length, inches
inches
CSSC9 Composite 9/32 Flat Tip/PHILLIPS ® .032 x 9/32ʺ, #2 9
SGDMRC4-C6 Composite Magnetic Bit Holder 3/8 — — 7-1/4

405
HAND TOOLS
• Plastic-coated handles on these pliers and cutters do not protect against electric shock
• Do not use damaged nonconductive tools
• Read safety precautions on pages W1 to W4 405

389-408 HT_old_335-351_Pliers.indd 405 12/10/19 1:20 PM