Page 410 - HAZET英文2021

Specialty Tools

Gearbox

4680 Lambda probe socket Gearbox

Made in Germany E c8
• For lambda probes on NISSAN ∙ 2174 Clutch centring tool
FORD ∙ VOLKSWAGEN ∙ SEAT ∙ ŠKODA etc.
• Optimal fit to the 6-point profile of the lambda probe • No need to centre the clutch plate over the needle bearing M
• Long design G
• Surface: chrome-plated • Application: Precise centring and installation of the
clutch plate to the clutch pressure plate
• DIN 3124, ISO 2725-1
• Quick and easy installation
• Also suitable for vehicles without clutch guide bearings
• For passenger cars and lightweight commercial vehicles
• With 2 collets:
size 1 = 15-21 mm x
size 2 = 21-28 mm x
• Plastic with metal tightening screw
1 S K G H 4
4680-1 22 92 30.4 25 165605 F

Made in Germany E c8
• Application: For lambda probe
(Ä 22 mm) on MERCEDES-BENZ
• Long design
• Surface: chrome-plated
• DIN 3124, ISO 2725-1
1 4 D

2174 013609

880 GZ Universal joint socket ∙ 12-point
1 S K G H 4
4680-2 22 110 36 30 022090 Made in Germany F% 7
• Application: Operation of gearbox fitting (12-point screws)
on AUDI vehicles model year 2008 → e.g. A4, A5, A6, A7, A8, Q5, Q7 R
Made in Germany E c8 • With hinge – for working in areas with restricted access
1
• Choice of j drive 12.5 = ⁄2″ or and for getting around obstructive edges
g 32 mm • With locking ball
• Surface: chrome-plated, polished
• Application: For lambda probe (Ä 22 mm) on VW, AUDI • DIN 3124, ISO 2725-1
• Long design
• Surface: chrome-plated
• DIN 3124, ISO 2725-1
C

1 S K G H 4
4680-3 22 110 41 34.4 022106 1 K G H c 4
880 G-Z 16 45.8 22 19 10 203734 O
880 G-Z 18 46.8 24.5 19 11 203529
Made in Germany E cs
• Application: Installation and
removal of the lambda probe (Ä 22 mm) 2756 Screwdriver socket
• On e.g. FORD ∙ BMW ∙ OPEL/VAUXHALL ∙ VW ∙ AUDI ∙ SEAT and ŠKODA
1
• Double j drive 12.5 = ⁄2″
or operation with hexagon drive Ä 30 mm Made in Germany F l N8
• Blister packed • Blade length of the h screwdriver socket is
• Surface: phosphatized, oiled precisely adapted to the available spatial conditions,
screwing in a linear motion is thus achieved and the
• DIN 3124, ISO 2725-1 socket is not in direct contact with the cardan shaft
flange A
• Application: Operation of the cardan
shaft screw connection on the
gearbox of MERCEDES-BENZ
GLC (X253) model years → 2015,
GLC Coupé (C253) model years → 2016 with 4Matic
• With locking ball
• Surface: l
• DIN 3124, ISO 2725-1
U

1 S 4 1 M N F r 4
4680-5 22 057870 2756-T 60 65 103 24.6 13.25 204243

Components and spare parts from page 482 to 490 Valid until December 31, 2021 409