Page 17 - 日本GOOT吉欧欧替 Vol.51 (英文)

PRODUCT SPECIFICATIONS / FUNCTIONS SYSTEM SOLDERING

TIP-TEMPERATURE RECOVERY FEATURES SOLDERING ALARM FUNCTION (PAT.)

Soldering efficiency increased by 39%! (1) Soldering time countdown (AT) Set SOLDERING IRONS

starts when the tip is applied to the
DIF
400 400 component. (The tip temperature DIF temperature
goes outside DIF)
300 300 (2) The alarm sounds after the preset Tip temperatrue
Tip Temperature Stability Tip Temperature Stability countdown. (The display flashes AT LEAD-FREE TEMPERATURE-CONTROLLED
200 RX-802AS 200 RX-852AS twice) ᶃ ᶄ ᶅ
Amount of time required : Amount of time required : (3) Operator takes the tip off the com-
10 min. 10 s. 7min. 20 s. ponent. Power ON Time

100 100

(˚C) (˚C)
0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14
(min.) (min.)
KEY LOCK CALIBRATION NEW ERGONOMIC

A generous amount of lead-free solder on Shortens soldering time significantly, and (PAT.) (PAT.) GRIP (PAT.)
a land of 20 mm dia. dissolving 35 points in the tip temperature is more stable.
succession at 350˚C. Lock with password. No tools The calibration function Prevents fatigue. Flexible
or card necessary. digitally offsets the diff erence cord, and a shorter distance

HIGH/LOW TEMPERATURE ALARM between the tip temperature from the handpiece to the tip.
and the temperature shown by
a tip thermometer being used.
An alarm sounds when the tem-
perature goes above or below - ) AUTOMATIC
temperature settings. SPECIFICATIONS SOLDER FEEDER
High/low setting range 3-100°C.
Lower limit Set temperature Upper limit Model RX-852AS
Voltage 110–120 V, 220–240 V AC 50/ 60 Hz
Power Consumption 145–170 W
INTELLIGENT SLEEP FUNCTION (PAT.) Power Cord Length 1.5 m inlet type
Temperature Setting Range 50–450°C TIP THERMOMETER SOLDERING TESTER
Automatically lowers the tem- Ripple Temperature ±5˚C (unloaded)
perature when the iron is not in Insulation Resistance Over 100 MΩ (500 V DC)
use, during a preset period of DIF Set temperature 150 W High-heat-capacity Iron Unit RX-85GAS (included)
DIF
time. Prevents tip oxidation and 80 W Standard Iron Unit RX-80GAS (sold separately)
excess heating. Can be used with Soldering tip temperatrue Operation Sleep start Applicable Iron Units Micro-Iron Unit RX-81GAS (sold separately)
Shutdown function. CT SST Soldering Tweezers Unit XST-80G (sold separately) SOLDER POTS
Iron Unit (RX-85GAS)
SLEEP FUNCTION RELEASE (PAT.) Power ON Time Accessories Soldering Iron Stand (ST-22)
Sleep mode can be exited (at any MODE: Sleep function ON/OFF Control Unit
time) by touching a wet sponge Output Voltage 24 V AC
with the tip to cause temperature CT: Sleep start time Dimensions 116 (W) × 105 (H) × 194 (D) mm

fluctuation. (Effective when tem- SST: Sleep set temperature Weight 4.8 kg
perature is set above 100°C) DIF: Sleep sensitivity / SMT PRODUCTS SURFACE-MOUNT
Each parameter can be set. Iron Unit
Model RX-85GAS
SHUTDOWN FUNCTION Iron Unit 150 W High-heat-capacity Iron Unit
Voltage/Consumption 24 V AC / 150 W
Shutdown Function When using together with Sleep function. Ground Resistance 2 Ω or less PRODUCTS
Less than 2 mV
Leak Voltage Nichrome heater DESOLDERING
Soldering tip temperatrue Operation SUT Power OFF Soldering tip temperatrue Operation Sleep Cord Length 174 mm(with RX-85HRT-5D)
Heater
DIF
DIF
Set temperature
Set temperature
DIF
DIF
1.5 m
Length
setting temp.
39 g (with RX-85HRT-5D)
Weight
Power OFF
Equivalent to IPC/EIA J-STD-001C
Power ON Time Power ON CT SUT Time *The length does not include the cord bushing. The weight does not include the cord. ACCESSORIES SOLDERING
When the unit is not used during the preset time, the unit automat- For replacement tips, refer to p. 28 & p. 29
ically shuts down. Great when you forget to turn the power off.
For Soldering Tweezers XST-80G, refer to p. 58
REPLACEMENT PARTS / OPTIONS MATERIALS SOLDERING WORK
RX-852AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber
RX-85GAS RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P
Tip is not included Tip is not included Tip is not included (2pcs/set) HEATED TOOLS
Accessories HANDPIECE GRIP RUBBER (Anti-static)
For quick identification of soldering tasks or types.
RX-80RB : gray RX-80RB-GR : green
RX-80RB-BK : black RX-80RB-OR : orange HAND TOOLS
Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB
www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
17