Page 15 - 日本GOOT吉欧欧替 Vol.51 (英文)

PRODUCT SPECIFICATIONS / FUNCTIONS SYSTEM SOLDERING

TIP-TEMPERATURE RECOVERY FEATURES SOLDERING ALARM FUNCTION (PAT.)

2
Five consecutive solderings on 22 mm cable (1) Soldering time countdown (AT) Set SOLDERING IRONS
starts when the tip is applied to the
temperature
component. (The tip temperature DIF
DIF
(˚C) goes outside DIF)
(2) The alarm sounds after the preset Tip temperatrue
500 countdown. (The display flashes AT LEAD-FREE TEMPERATURE-CONTROLLED
twice) ᶃ ᶄ ᶅ
Set at
400 Set at 500°C 500°C (3) Operator takes the tip off the com-

ponent. Power ON Time
300
200 KEY LOCK (PAT.) CALIBRATION (PAT.)
Lock with password. No tools or The calibration function
100 card necessary. digitally offsets the difference
with tip RX-89HRT- 15D between the tip temperature
and the temperature shown by
a tip thermometer being used.
0 20 40 60 80 100 (s) AUTOMATIC
HIGH/LOW TEMPERATURE ALARM SPECIFICATIONS SOLDER FEEDER
Model RX-892AS
An alarm sounds when the tem-
perature goes above or below - ) Voltage 100–240 V AC 50/ 60 Hz
temperature settings. Power Consumption 560-630 W
High/low setting range 3-100°C. Power Cord Length 1.5 m inlet type TIP THERMOMETER SOLDERING TESTER
Lower limit Set temperature Upper limit Temperature Setting Range 50–500°C
Ripple Temperature ±5˚C (unloaded)
Insulation Resistance Over 100 MΩ (500 V DC)
INTELLIGENT SLEEP FUNCTION (PAT.) Applicable Iron Units RX-89GAS
Iron Unit (RX-89GAS)
Accessories SOLDER POTS
Automatically lowers the tem- Soldering Iron Stand (ST-29)
perature when the iron is not in
use, during a preset period of DIF Set temperature Control Unit
DIF
time. Prevents tip oxidation and Output Voltage 40 V DC
excess heating. Can be used with Soldering tip temperatrue Operation Sleep start Dimensions 136 (W) × 240 (H) × 184 (D) mm
Shutdown function. CT SST Weight 4.3 kg
SLEEP FUNCTION RELEASE (PAT.) Power ON Time Iron Unit / SMT PRODUCTS SURFACE-MOUNT
Sleep mode can be exited (at any MODE: Sleep function ON/OFF Model RX-89GAS
time) by touching a wet sponge Voltage / Consumption 40 V DC / 500 W
with the tip to cause temperature CT: Sleep start time
fluctuation. (Effective when tem- SST: Sleep set temperature Ground Resistance 2 Ω or less

perature is set above 100°C) DIF: Sleep sensitivity Heater Nichrome heater PRODUCTS
Each parameter can be set. Cord Length 1.8 m DESOLDERING
Length 232 mm (with RX-89HRT-15D)
Weight 120 g (with RX-89HRT-15D)
SHUTDOWN FUNCTION
*The length does not include the cord bushing. The weight does not include the cord.
Shutdown Function DIF Set temperature When using together with Sleep function. ACCESSORIES SOLDERING
Soldering tip temperatrue Operation SUT Power OFF Soldering tip temperatrue Operation DIF Sleep For replacement tips, refer to p. 28
DIF
Set temperature
DIF
setting temp.
Power OFF
Power ON Time Power ON CT SUT Time MATERIALS SOLDERING WORK
When the unit is not used during the preset time, the unit automat-
ically shuts down. Great when you forget to turn the power off.

REPLACEMENT PARTS / OPTIONS HEATED TOOLS
Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner
RX-89GAS ST-53SP ST-40BW

Tip is not included (2pcs/set) HAND TOOLS

www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
15