Page 288 - USAG2021

753
746
Crimping pliers for cable tip terminals
Crimping pliers for non-insulated open and - Rack-type model with frontal insertion and automatic
closed terminals reopening of jaws at the end of the compression
- Model with screw-cutter, wire-cutter and wire-stripper - PVC handles
- PVC handgrip - Jaws in microcast steel
- Body in cut sheet steel - Body in pressed sheet steel
a
code
L k a L k Cod. Q.tà x conf. € 754 A
Cod.
2
mm mm 2 code Q.tà x conf. € mm mm
235 0,5÷1 1,5÷2,5 4÷6 U07460001 5 225 0,25÷6 U07530002 1 Crimping pliers with interchangeable moulds
- Moulds easy to be replaced
- Handles at 90° for greater visibility during use
- Big levers for a reduced effort and for use with one or two
hands
- Supplied with 2 moulds:
747 for pre-insulated terminals, 0.1 to 6 mm² / AWG 26-10
(green, yellow)
Crimping pliers for pre-insulated terminals for pre-insulated terminals, 0.5-2.5 mm² / AWG 22-14
- Model with screw-cutter, wire-cutter and wire-stripper (blue, red)
- PVC handgrip
- Body in cut sheet steel 753 A k L
a
Cod.
mm
2
L k Cod. Q.tà x conf. € Crimping pliers for cable tip terminals 0,1÷6 - 0,5÷25 mm code Q.tà x conf. €
a
mm mm 2 code 230 U07540002 1
235 0,5÷1 1,5÷2,5 4÷6 U07470001 5 - Rack-type model for reducing the compression effort
- Ergonomic PVC grip which facilitates one-handed
tightening
- Stainless steel mould with 5 shapes
- Sheet steel body
a
L
748 DIN 46247-46248 mm k Cod. Q.tà x conf. €
code
2
mm
228 0,5÷1-1,5-2,5-4-6 U07530003 1 754 MA
Crimping pliers for non-insulated open
terminals Spare mould
- Jaws in microcast steel - For pre-insulated terminals 0,5-2,5 mm²/AWG 22-14
- Body in pressed sheet steel (blue, red)
a
Cod.
L k code Q.tà x conf. € k code Q.tà x conf. €
a
Cod.
2
mm
mm mm 2
227 0,25÷0,5 0,5÷1,0 1,5÷2,5 4÷6 U07480001 1 0,5÷25 U07540002Q 1
753 KA
749 DIN 46230-46234 Self-adjusting crimping pliers for square
terminals
Crimping pliers for non-insulated closed - For insulated and non-insulated terminals 754 MB
terminals - Capacity 0,14-10 mm²/AWG 26-8
- Jaws in microcast steel - Opening system for multiple consecutive operations Spare mould
- Body in pressed sheet steel - Allows to crimp applying little force on the handles - For pre-insulated terminals 0,1-6 mm²/AWG 26-10
- Low weight and compact size for easy handling (green, yellow)
L k code Q.tà x conf. €
a
Cod.
mm mm 2
227 0,1÷0,35 0,5÷1,0 1,5÷2,5 4÷6 10÷16 U07490001 1 k code Q.tà x conf. €
a
Cod.
mm
2
k L 0,1÷6 U07540003Q 1
a
code
mm 2 mm Cod. Q.tà x conf. €
0,14÷10 230 U07530004 1
751
Crimping pliers for pre-insulated terminals
- Rack model for progressive and calibrated crimping
pressure, with automatic jaw opening at the end of
tightening 754 MC
- PVC handgrips
- Jaws in microcast steel Spare mould
- Sheet steel body - For cable-tip terminals 0,25-10 mm²/AWG 24-8
L k Cod. Q.tà x conf. € k Cod. Q.tà x conf. €
a
a
mm mm 2 code mm 2 code
215 0,5÷1 1,5÷2,5 4÷6 U07510002 1 0,25÷10 U07540004Q 1
286