Page 168 - 日本前田TONE

For manual
9.5 Head pivots up to 90 degrees for both sides, tilted by 15 degrees. SHORT SPINNER HANDLE
Use the handle upright for temporary tightening, and lays the
handle on it’s side for final tightening.
Able to repair by yourself through purchasing repair kit. Dimensions (mm)
Models Square Drive Qty./Carton Weight
(Generally)
(mm)
(g)
Good Design award
9.5 NS3S 9.5 22.2 200 6 230
L
D
mm
3/8
%
̡
NS3S
SPINNER HANDLE
Good Design award Dimensions (mm)
Models Square Drive Qty./Carton Weight
(mm) (Generally) (g)
D L
NS3
NS3 9.5 22.2 300 6 305
%
̡
Good Design award
LONG SPINNER HANDLE
NS3L

Square Drive Dimensions (mm) Qty./Carton Weight
Models
(mm) (Generally) (g)
D L
NS3L 9.5 22.2 400 6 390
〈Example〉 %
̡

CAUTION
● Do not over torque, as the whole lenghth is long enough to apply excessive load.
90 degree refraction on both sides.

■PinRepair kit for Sunnah handles
Models RK-NS3
Suitable model : NS3S, NS3, NS3L
Parts table No.1-4 is one set.
■ Parts table
NO. Descriptions Qty.
● 1 Driving part 1
● 2 Pin 1
● 3 Latch 1
● 4 Spring 1
CAUTION
● Repair may be difficult for the general public.

Head pivots up to 90 degrees for both sides, tilted by 15 degrees. SPINNER HANDLE
Use the handle upright for temporary tightening, and lays the
handle on it’s side for final tightening.
Square Dimensions (mm) Qty./Carton Weight
9.5 Models Drive D d L (Generally) (Store Center) (g)
(mm)
mm 231 9.5 20 9.5 250 10 6 365
3/8
Spinner handle 231 can be used as a T-shaped wrench in combination with cross bar CB30
(P170).
231

CAUTION
166 'PS IBOE UPPM ● Avoid giving shock by hitting with hammer etc..
● Insert square drive positively to the bottom.