Page 231 - 世霸SuperToolVol.6

φ11.5 FS-LS

φF
（top side）
■ SCREW SUPPORT,
φ8.2 both sides
G2 Long Stroke Type (a Pair) PAT.
M8 hex. width across
flats 4 both sides G1
entrance φ8.2 max. Features
(for hook spanner) E C
E

min. ● Ideal for supporting heavy workpieces, adjusting clamp height and for
B preventing chattering during cutting operation.
A
● A middle screw has been added to create a long stroke (1.5 to 2 times
M8 hex width across longer than our conventional models).
flats 4 both sides φD
● With conventional items, when the male screw is turned while there is
Example of use a workpiece supported, scratches to the workpiece or misalignment JIGS AND CLAMPING TOOLS
could occur. But this item innovative design solves this problem with
the use of a middle male screw.
● As the upper and lower screws have same direction with diff erent pitch,
middle male screw adjustment can be fi ne-tuned with light force.
● The lock screw (with lock piece) that locks the forcing screw helps
avoiding screw loosening.
FS130LS
● For corrugated surfaces or irregular shaped workpiece, use screw
support tips.
● Material : S45C Accessories
● Heat treatment : Quenched 35～47HRC
● Finish : Black fi nish ● Hex key wrench, 1 pc (size 4mm)
Size （mm） Allowable Pin wrench for Pin wrench for N.W.（kg）
Item No.
A Stroke B〜C D E F G1 G2 load ( （kN） upper screw middle / main body (a pair)
FS80LS 26 50〜80 50 12 40 Tr32×3 Tr18×2 80 PW406 PW508 1.2
FS130LS 46 70〜130 50 12 40 Tr32×3 Tr18×2 80 PW406 PW508 1.6
Jig blocks
FS200LS 68 100〜200 60 16 50 Tr40×4 Tr25×3 150 PW508 HW105A 3.6
FS300LS 108 140〜300 60 16 50 Tr40×4 Tr25×3 150 PW508 HW105A 5.0
MSS-LS
φF
φ11.5（top side） Sub tables
φ8.2 both sides G2 ■ MAGNETIC SCREW SUPPORT,
M8 hex. width across Long Stroke Type (a Pair) PAT.
flats 4 both sides G1
entrance φ8.2 E max.
(for hook spanner) E C Features Jig plates
M8 hex width across A min.
flats 4 both sides B ● Ideal for supporting heavy workpieces, adjusting clamp height and for
preventing chattering during cutting operation.
G
● A middle screw has been added to create a long stroke (1.5 to 2 times
φD
longer than our conventional models).
φ4 spring pin both sides
● With conventional items, when the male screw is turned while there is Angle plates
a workpiece supported, scratches to the workpiece or misalignment
could occur. But this item innovative design solves this problem with
the use of a middle male screw.
● As the upper and lower screws have same direction with diff erent pitch,
Example of use middle male screw adjustment can be fi ne-tuned with light force.
● The lock screw (with lock piece) that locks the forcing screw helps Setting
blocks
avoiding screw loosening.
MSS150LS ● For corrugated surfaces or irregular shaped workpiece, use screw
support tips.
● The magnet built-in at the bottom of the body makes it possible to use
the screw support not only horizontally but also vertically. Precision
● Material : S45C Accessories vises
● Heat treatment : Quenched 35～47HRC
● Finish : Black fi nish ● Hex key wrench, 1 pc (size 4mm)
Size （mm）
Allowable Pin wrench Pin wrench N.W. Vacuum
Item No. Stroke G1 G2 load for upper for middle / （kg） chucks
A D E F G
B〜C (30° trapezoidal thread) （30° trapezoidal thread） （ｋN） screw main body （a pair）
MSS90LS 26 60〜 90 10 PW406 PW508 1.32
50 12 40 Tr32×3 Tr18×2 80
MSS150LS 46 90〜150 20 PW406 PW508 2.00
MSS220LS 68 120〜220 20 PW508 HW105A 3.94 Clamp kits
60 16 50 Tr40×4 Tr25×3 150
MSS310LS 108 150〜310 10 PW508 HW105A 5.02
φF
φ11.5 FS-S
(top side) Screw
■ SCREW SUPPORT (a Pair) supports
G
Feature
● For corrugated surfaces or irregular shaped workpiece, use screw Mini blocks,
E mini
max. support tips. supports
C
min. Size （mm）
A B Item Allowable Applicable N.W.
No. A Stroke D E F G load pin wrench （kg）
B〜C （kN） （a pair） Clamping
tools
FS50S 21 37〜50 40 8 35 Tr20×3 80 PW355 0.56
φD
FS70S 32 50〜70 40 9 35 Tr20×3 80 PW355 0.78
FS100S Example of use FS100S 46 70〜100 45 12 40 Tr20×3 80 PW406 1.47
FS150S 76 100〜150 50 12 45 Tr25×4 150 PW457 2.65
● Material : S45C Clamps
FS250S 120 150〜250 60 15 50 Tr32×5 200 PW508 5.64
● Heat treatment : Quenched 35～47HRC
● Finish : Black fi nish FS300S 170 200〜300 60 15 50 Tr32×5 200 PW508 7.17
229