Page 172 - 世霸SuperToolVol.6

BH32

■ SLIDE HAMMER BEARING PULLER SET
(Heavy Duty Type for Professional Use)

Features
● Dedicated tool set for removing bearings from inner rings.
● Steel case as standard acc.
Example Slide
of use
A) Insert the internal claw onto the bearing.
A) B) B) Fix the internal claw cap and tighten the
Adjustment adjustment screw.
screw Set item Set N.W.
GEAR PULLERS
＊ The adjustment screw gets pulled out, the Item name Item No. Q’ty
Internal internal claw tips open, hook the bearing No. （kg）
claw cap Slide hammer BPH6 1 set
bottom part and hold the bearing, as BH32 4.5
shown on Fig. B). Internal claw BPJ0〜4 5
BP60
■ BEARING PULLER SET
(Heavy Duty Type for Professional Use)
Gear pullers
(2-claw type)
Features
● Dedicated tool set for removing bearings from inner
Gear pullers and outer rings.
(auto-grip, ● Steel case as standard acc.
G type)
Set item Item name Item No. Q’ty Set N.W.
No. （kg）
Gear pullers Slide hammer BPH6 1 set
(3-claw type)
Internal claw BPJ0〜7 8
Standing puller BPS6 1
BP60 14
Opening stopper BPU6 1
Single size offset wrench BPM6 1
Shock speed
pullers Hex key wrench BPX4 1
BPS ・ BPJ ・ BPH ・ BPSJ ・ BPU ・ BPM
■ Standing puller S
Sliding gear Example ■ BEARING PULLER SET Parts
pullers
of use
Features
Bearing ● Dedicated for removing outer ring by setting with the
pullers,
bearing H opening stopper (BPU6) for stable operation.
puller sets T t
D ● H indicates the claw reaching length when the forcing
screw is lifted to the highest point.
Bearing ■ Standing puller (outer ring removing ability table)
insertion
tool sets Size （mm）
D t Breaking load
Item No. H T S
Pulled object （kN）
Hydraulic Claw reaching Claw tip thickness Forcing screw hex.
pullers, Dia. (external diameter) Width length width across flats
power BPS6 45〜150 Max. 55 Max. 150 6 22 60
pushers
■ Internal claw BPJ5 M15×1.5
Accessories
(inner ring removing ability table)
Pulled object （mm） Applicable Pulled object （mm） Applicable full length
Item No. Item No.
Dia. (internal dia.) Width bearing No. Dia. (internal dia.) Width bearing No.
■ Slide hammer
BPJ0 10.0〜13.0 12 00・01 BPJ4 25.0〜32.0 20 05・06
BPJ1 12.0〜15.0 13 01・02 BPJ5 34.5〜41.5 23 07・08 Full length
Item No.
BPJ2 15.0〜20.0 15 02・03・04 BPJ6 44.0〜51.0 27 09・10 （mm）
BPJ3 20.0〜25.0 17 04・05 BPJ7 55.0〜60.0 31 11・12 BPH6 511

full length
■ Standing puller claw (1 pc) ■ Opening stopper ■ Offset wrench
Item No. Full length（mm） Item No. Item No.
BPSJ 222.8 BPU6 BPM6

170 ●For all the appendix of the gear pullers, please refer to P.288