Page 171 - 世霸SuperToolVol.6

BP-S ・ BP30FS

■ BEARING PULLER SET

Features
L ● Dedicated tool set for
L1 T removing bearings from
inner rings.
● Chuck the internal claw
on the bearing internal GEAR PULLERS
H diameter, set on the stand
BP15S BP30S internal claw
and then the bearing
can be removed just by
turning the nut.
T1
claw reaching length
Tighten the adjustment screw
1) Insert the internal claw
matching with the bearing
internal diameter at the
bottom of the bearing,
tighten the adjustment
Set to screw and set so that Gear pullers
hook (2-claw type)
at the bottom the internal claw is firmly
BP30FS
(Fig.1) hooked to the bottom of
the bearing. (Fig.1) Gear pullers
Example Fix and Tighten the nut 2) Connect and fix the lower (auto-grip,
to remove
G type)
of use tighten Connect part of the standing puller
with a
spanner the screw forcing screw to the
part
adjustment screw. (Fig.2)
3) Fix the hex. part of the Gear pullers
(3-claw type)
forcing screw lower part
with a spanner, tighten
the nut and remove the
(Fig.2) bearing. (Fig.2) Shock speed
pullers
Size （mm） Set N.W.
Item No.
Applicable bearing (internal diameter) L L1 T T1 H Claw reaching length （kg）
BP15S φ8、φ10、φ12、φ15 100 42〜88 20 10 120 Max.150 1.5 Sliding gear
BP30S φ17、φ20、φ25、φ30 110 47〜98 25 10 130 Max.150 2 pullers
BP30FS φ8、φ10、φ12、φ15、φ17、φ20、φ25、φ30 Set of the 2 items above 3.8
Bearing
BPS ・ BJ puller sets
pullers,
bearing
■ BEARING PULLER SET Parts
Bearing
insertion
tool sets

■ Stand set
Hydraulic
pullers,
Item No. Applicable internal claw power
pushers
BPS15 BJ 8〜15
BPS15 BPS30 BPS30 BJ17〜30
Accessories
M10×1.5 M12×1.75

BJ8 BJ10 BJ17 BJ20

BJ12 BJ15 BJ25 BJ30
■ Internal claw
Applicable bearing Applicable bearing
Item No. Applicable stand Item No. Applicable stand
(internal diameter)（mm） (internal diameter)（mm）
BJ8 BPS15 φ8 BJ17 BPS30 φ17
BJ10 BPS15 φ10 BJ20 BPS30 φ20
BJ12 BPS15 φ12 BJ25 BPS30 φ25
BJ15 BPS15 φ15 BJ30 BPS30 φ30

●For all the appendix of the gear pullers, please refer to P.288 169