Page 4 - 诺霸英文2022
P. 4

INTRODUCTION



        INTRODUCTION TO TORQUE



        What is Torque?

        Torque is any force or system of forces that tends to cause rotation about an axis.


        Measurement of Torque

        Imagine someone tightening a bolt using a socket attached to a meter (m) long bar. If they apply 10 kg of force (kgf) perpendicular
        to the bar they will produce a torque of 10 kgf·m at the axis (the centre of the bolt).
        However, under the S.I. system of measurement, force is expressed in Newtons (N) rather than kgf. The conversion between kgf and
        N is x 9.807 so the person is applying 98.07 N·m of torque.















                                                                           1 m




                                                  Torque = Force x Distance
                                                                                                100 N
                                     Example 1: Distance = 1 m, Force = 100 N, Torque = 100 N·m
                                     Example 2: Distance = 2 m, Force = 100 N, Torque = 200 N·m
                                    Example 3: Distance = 1 ft, Force = 100 lbf, Torque = 100 lbf·ft
        The Importance of Torque Control
        Although many methods exist to join two or more parts together, the ease of assembly and disassembly provided by threaded
        fasteners make them the ideal choice for many applications.
        The object of a threaded fastener is to clamp parts together with a tension greater than the external forces tending to separate
        them. The bolt then remains under constant stress and is immune from fatigue. However, if the initial tension is too low, varying
        loads act on the bolt and it will quickly fail. If the initial tension is too high, the tightening process may cause bolt failure. Reliability
        therefore depends upon correct initial tension. The most practical way of ensuring this is by specifying and controlling the
        tightening torque.
                                                                        Torque
        Bolt Tension                                                                                       Force

        When an assembly is clamped by tightening a nut and
        bolt, the induced tension causes the bolt to stretch� An
        equal force acts to compress the parts which are thus
        clamped�

        The proof load of a bolt, normally established by test,
        is the load which just starts to induce permanent
        set – also known as the yield point� Typically bolts are
        tightened to between 75% and 90% of yield.     Clamping force
                                                                                 Clamping force


                                                                    Tension in bolt






   3                                     enquiry@norbar�com | www�norbar�com
   1   2   3   4   5   6   7   8   9