Page 168 - HAZET英文2021

Hand Tools

4 Range of sockets

1058 Adapter 1000 S Impact socket ∙ 6-point

Made in Germany 9
• With bolt for locking pin retaining Made in Germany
• Surface: chrome-plated • For extremely high load c9
• DIN 3123, ISO 3316 • Short design
• With borehole for locking pin or safety spring and grove for O-ring
• Surface: phosphatized, oiled
• DIN 3129, ISO 2725-2

1 K 4

3
• i Drive 25 = 1″ – j drive 20 = ⁄4″
• Locking pin retaining * = Not according to DIN
1058-1 60.6 002061 1 4 3
• i Drive 12.5 = ⁄2″ – j Drive 20 = ⁄4″ K G H c ⁄4
3
1
• Locking ball 1000 S-19 * 48 32 44 13 001231
• Replaceable square 1058-02 A 1000 S-22 50 36.5 44 16 001248
1058-2 52.3 002078 1000 S-24 50 39.5 44 17 001255
• Insert square for HAZET adapter 1058-2 1000 S-27 51 43.5 44 19 001262
1058-02 A – 233557 1000 S-28 * 54 45 44 19 001279
1000 S-30 54 47.4 44 21 001293
1000 S-32 54 49.9 44 21 001309
1021 Universal joint 1000 S-33 * 54 51.5 44 16 001316
1000 S-34 54 52.4 44 16.8 001323
Made in Germany 49 1000 S-36 57 54.9 44 23 001330
• With hinge – for working in areas with restricted
access and for getting around obstructive edges
• Drive with bolt for locking pin retaining, 1000 SLG Impact socket ∙ 6-point
output with locking pin retaining
• Surface: chrome-plated
• DIN 3123, ISO 3316 • Long design c9
• With borehole for locking pin or safety spring and grove for O-ring
• Surface: phosphatized, oiled
• DIN 3129, ISO 2725-2

1 K 4

1021 105 002054

1017 Extension
Made in Germany 49 1 K G H c 4
• Drive with bolt for locking pin 1000 S Lg-24 100 39.5 44 17 001392
retaining, output with locking pin retaining
• Surface: chrome-plated, polished 1000 S Lg-27 100 43.5 44 19 001408
1000 S Lg-30 100 47.5 44 21 001422
1000 S Lg-32 100 50 44 21 001439
1000 S Lg-33 100 51.5 44 21 001446
1000 S Lg-36 100 55 44 23 001460

1017-8 = DIN 3123, ISO 3316
1 K 4 1004 S Impact socket ∙ 6-point
1017-3 75 001996
1017-8 200 002016 Made in Germany c9
• E.g. for deeply located wheel nuts and
bolts on commercial vehicles
1018 Extension • Extra long design
• With borehole for locking pin or safety
spring and grove for O-ring
Made in Germany 49
• Drive with bolt for locking pin • Surface: phosphatized, oiled
retaining, output with locking pin retaining • DIN 3129, ISO 2725-2
• DIN 3123, ISO 3316

1 K G H c 4
1 K 4 1004 S-32 400 48 44 32 055784
1018 400 002030 1004 S-33 400 48 44 32 055791

Components and spare parts from page 482 to 490 Valid until December 31, 2021 167