Page 63 - 日本GOOT吉欧欧替 Vol.51 (英文)

New open-valve mechanism achieves unrivalled RoHS ANTI LEAD SYSTEM SOLDERING
vacuum power and start-up speed. 2 STATIC FREE
400% MORE SUCTION CAPACITY SOLDERING IRONS
With open-valve mechanism
TP-280AS CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs

SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER

Makes changing the filter easy
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
TP-200AS TP-280AS SOLDER FEEDER AUTOMATIC

O P E N - V AL V E M E C H AN I S M SPECIFICATIONS TIP THERMOMETER SOLDERING TESTER
OPEN-VALVE MECHANISM
Two-stage trigger switch (PAT.P) MODEL TP-280AS
Step 1 Voltage 110 V,120 V, 220–240 V AC 50/ 60 Hz
Pulling the trigger (lightly) activates the first 130 W (110 V,120 V)
stage switch. The pump starts, and the air Power Consumption 170-200 W (220-240 V)
pressure decreases in the vacuum chamber. Trigger SOLDER POTS
Power Cord Length 1.5 m
Step 2 Temperature Setting Range 250−450˚C
Next, pulling the trigger fully activates the First stage Insulation Resistance Over 100 MΩ(500 V DC)
second stage. The open-valve will open, and switch Vacuum Pump System Diaphragm system
the solder is sucked up at once by the Vacuum - 0.08 MPa (-600 mmHg)
negative pressure in the vacuum chamber.
Accessories Cleaning pin TP-100CP-13
Soldering iron stand ST-76 / SMT PRODUCTS SURFACE-MOUNT

Solder Total Weight Approx. 2.9 kg (w/o cord, hose )
CONTROL BOX
Pull trigger Open-valve
fully mechanism Output Voltage 110 V, 120 V, 220–240 V AC
Dimensions 95 (W)…x 205 (H)…x 256 (D)…mm
Weight 2.6kg (w/o cord, hose ) PRODUCTS DESOLDERING
Pump
Negative
pressure DESOLDERING UNIT
Input Voltage/Power Consumption 110-120 V, 220–240 V AC / 85 W
Vacuum
chamber Heater Ceramic Heater
Cord Length 1.2 m
Dimensions 220 × 155 mm ACCESSORIES SOLDERING
NOZZLE TEMPERATURE-RECOVERY FEATURES Weight 250 g (w/o hose )
Standard Nozzle TP-100N-S5
Soldering Unit
Solder melted consecutively on Desoldering Unit
ʢˆʣ 500 ʢˆʣ 500
5x5mm land. Approx. 2 s / land. 400 Work (Set at 450°C)
5JQ UFNQ (with TP-100N-10 nozzle) Nozzle temp. 300 For replacement tips, nozzles, and optional parts, refer to p. 65 MATERIALS SOLDERING WORK
400
Work (Set at 400°C)
300
200
200
100 100
0 0
1 2 3 4 5 2 4 6 8 10
ʢmin.ʣ ʢmin.ʣ
Vacuum Degree Chart
The open-valve allows Vacuum pressure compared with
ʢNN)Hʣ
600
the device to reach vac- other goot models HEATED TOOLS
500
uum pressure of -0.06MP (mmHg) 400
-760
TP-280AS
(approx.-450 mmHg) in 300 SVS-800AS/580AS
only 0.1 second. (about 200
100
4 times faster than our -380
0 ST-76
0.5
TP-200AS). 0.1 0.2 0.3 0.4 ʢsec.ʣ soldering iron
SVS-500ASS
TP-200A
stand (included) HAND TOOLS
0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)
www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
63