Page 61 - 日本GOOT吉欧欧替 Vol.51 (英文)

PRODUCT SPECIFICATIONS / FUNCTIONS SYSTEM SOLDERING

TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES SPECIFICATIONS

MODEL SVS-800AS SVS-580AS SOLDERING IRONS
Soldering Unit Desoldering Unit
ʢˆʣ 500 ʢˆʣ 500 Voltage 220-240 V AC 50/ 60 Hz 110 V,120 V, 220-240 V AC 50/ 60 Hz
670-760 W
200 W (110 V,120 V)
400 Work (Set at 400°C) 400 Work (Set at 450°C) Power Consumption – 270-300 W (220-240 V)
5JQ UFNQ 300 Nozzle temp. 300 Power Cord Length 1.5 m Inlet type 250−450˚C
1.5 m
250−450˚C
Temp. Desoldering Unit
200
200
100 100 Setting Soldering Unit 200−480˚C 200−480˚C
Range Rework 150-550℃
0 0
1 2 3 4 5 2 4 6 8 10 Insulation Resistance Over 10 MΩ (500 V DC) Over 100 MΩ (500 V DC)
ʢmin.ʣ ʢmin.ʣ
Vacuum Degree Chart Vacuum Pump System Diaphragm system Diaphragm system
Solder melted consecutively on 5x5mm land. Approx. 2 s / land. Vacuum - 0.08 MPa (-600 mmHg) - 0.08 MPa (-600 mm Hg)
600
(with PX-2RT-B tip, TP-100N-10 nozzle) ʢNN)Hʣ 500 Air Flow 5-25L /min –
400
The open-valve allows Vacuum pressure compared with Accessories Cleaning pin TP-100CP-13/ Soldering iron stand ST-76
Total Weight
4.0 kg
9.3 kg
300
the device to reach vac- other goot models
200
uum pressure of -0.06MP (mmHg) 100 CONTROL BOX
-760
(approx.-450 mmHg) in SVS-800AS 0.2 0.3 0.4 0.5 Output Voltage 220-240 V AC 110 V,120 V, 220-240 V AC AUTOMATIC
0
0.1/580AS
only 0.1 second. (about 4 ʢsec.ʣ Dimensions 405 (W) × 240 (H) × 235 (D) mm 205 (W) x 170 (H) x 160 (D) mm SOLDER FEEDER
times faster than our SVS- -380 Weight 8.4 kg (w/o cord, hose ) 3.6 kg (w/o cord, hose )
500AS). SOLDERING UNIT
SVS-500AS
Input Voltage 220-240 V AC 110 V,120 V, 220-240 V AC
0 0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.) Power Consumption 85 W
Ground Resistance 2 Ω or less TIP THERMOMETER SOLDERING TESTER
Leak Voltage Less than 2 mV
Heater Ceramic heater
SUCTION CAPACITY COMPARISON Cord Length 1.2 m
The arrow indicates solder residue. Length 190 mm (with PX-2RT-B)
Weight 70 g (with PX-2RT-B )
Standard Tip PX-2RT-B SOLDER POTS
DESOLDERING UNIT
Input Voltage 220-240 V AC 110 V,120 V, 220-240 V AC
Power Consumption 70W
Heater Ceramic Heater
Cord Length 1.2 m
The arrow indicates solder residue. / SMT PRODUCTS
Dimensions 220 x 155 mm SURFACE-MOUNT
SVS-500AS SVS-800AS/ 580AS Weight 250 g (w/o cord, hose )
Standard Nozzle TP-100N-S5
REWORK UNIT
OPEN-VALVE MECHANISM Input Voltage 220-240 V AC –
Two-stage trigger switch (PAT.P) Power Consumption 370-430 W – PRODUCTS DESOLDERING
Heater Nichrome Heater –
Hose length between 1 m –
Step 1 Handpiece and Control Unit
Pulling the trigger (lightly) activates the first Length 220 mm (w/o cord) –
stage switch. The pump starts, and the air Weight 180 g (w/o nozzle, cord) –
pressure decreases in the vacuum chamber. Trigger
This machine does not have vacuum pickup function. ACCESSORIES SOLDERING
Step 2
Next, pulling the trigger fully activates the First stage
second stage. The open-valve will open, and switch For replacement tips, nozzles, and optional parts, refer to p.56 & p. 65
the solder is sucked up at once by the
negative pressure in the vacuum chamber.

MATERIALS
Solder SOLDERING WORK
Pull trigger Open-valve
fully mechanism
ST-76
Pump
Negative soldering iron stand HEATED TOOLS
pressure (included)
Vacuum
chamber HAND TOOLS

www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
61