Page 359 - USAG2021

LOW UNITS

5010 A3 5010 A4/7
Low unit with sliding doors Low unit with 7 drawers
5010 A1 - The double unit allows to store tools and/or long and - Low unit with 7 drawers: 5 drawers height 60 mm;
bulky objects that have no place in a standard cabinet
1 drawer height 130 mm; 1 drawer height 200 mm
Low unit with 2 doors - 2 sliding doors in steel sheet, ideal for narrow spaces - Maximum load per drawer: 50 kg
- 2 hinged doors mounted on invisible pin hinges with - 1 internal shelf adjustable in height (100 mm steps), - Overall dimensions of the drawers: L569 x D421 mm
resistant to a load of 75 Kg
110 ° opening - Possibility to use the low support 5010 FC/2, obtaining a - Fully opening drawers on telescopic ball bearing slides
- The doors have been tested over 10000 opening/closing total height of 985 mm - Drawers close automatically at end-of-stroke
cycles - Sheet steel with epoxy coating, colour red RAL 3020, - Centralized locking
- Anodized aluminum handle black RAL 9004 - Drawers with handles in anodized aluminium
- 1 internal shelf adjustable in height (100 mm steps), - Possibility to use the low support 5010 FC/1, obtaining a
resistant to a load of 50 Kg total height of 985 mm
- Possibility to use the low support 5010 FC/1, obtaining a - Sheet steel with epoxy coating, colour red RAL 3020,
a
total height of 985 mm LxPxH Kg Cod. Q.tà x conf. € black RAL 9004
code
mm
- Sheet steel with epoxy coating, colour red RAL 3020, 1449x701x810 84,7 U50100003 1
black RAL 9004
LxPxH Cod. Q.tà x conf. €
a
mm Kg code
LxPxH code Q.tà x conf. € 722x701x810 82,5 U50100005 1
Cod.
a
mm Kg
722x701x810 57,5 U50100001 1

5010 A5
Low unit with 2 vertical drawers
- 2 vertical drawers with perforated panels on both sides
5010 A4/6 (600x600 mm, thickness 1,2 mm, square holes 6x6 mm.
5010 A2 Low unit with 6 drawers pitch 12 mm)
Low unit with 2 glazed doors - Low unit with 6 drawers: 4 drawers height 60 mm; - Tools can be fixed with metal supports and hooks (range
universal hooks CKS)
- Transparent doors allow a quick check of contents, 1 drawer height 130 mm; 1 drawer height 270 mm - Useful storage surface : 1,6 m²
lay-out and cleaning - Maximum load per drawer: 50 kg - Centralized locking system
- 2 hinged doors in transparent plexiglass mounted on - Overall dimensions of the drawers: L569 x D421 mm - Equipped with 4 adjustable feet for easy and fast
invisible pin hinges with 110 ° opening, thickness 3 mm - Fully opening drawers on telescopic ball bearing slides positioning
- The doors have been tested over 10000 opening/closing - Drawers close automatically at end-of-stroke - Possibility to place one unit with vertical drawers
cycles - Centralized locking 5010 A5 on the other inserting between them a wooden
- Anodized aluminum handle - Drawers with handles in anodized aluminium panel 5010 EA or a wooden panel covered in stainless
- 1 internal shelf adjustable in height (100 mm steps), - Possibility to use the low support 5010 FC/1, obtaining a steel 5010 EC (it is not possible to use the metal panel
resistant to a load of 50 Kg total height of 985 mm with rubber coating 5010 EE)
- Possibility to use the low support 5010 FC/1, obtaining a - Sheet steel with epoxy coating, colour red RAL 3020, - It is possible to increase the total height from 810 to
total height of 985 mm black RAL 9004 985 mm with the lower base 5010 FC/1
- Sheet steel with epoxy coating, colour red RAL 3020, - Sheet steel with epoxy coating, colour red RAL 3020,
black RAL 9004 black RAL 9004

LxPxH code Q.tà x conf. € LxPxH Cod. Q.tà x conf. € LxPxH code Q.tà x conf. €
a
a
a
Cod.
Cod.
code
mm Kg mm Kg mm Kg
722x701x810 55,7 U50100002 1 722x701x810 79 U50100004 1 722x701x810 70 U50100006 1
Choose the height that
best suits to your needs
All the units with low support
5010 FC (height 1025 mm)
allow to store a roller cabinet
850 mm 1025 mm It is sufficient to assemble
under the worktop.
the side in vertical position.

without low with low
support 5010 FC support 5010 FC

357