Page 332 - USAG2021

1954 A

Telescopic engine support with
rotating arms
- Holds engine from below when supports are removed
from vehicle
- Universal: for cars and commercial vehicles
- It allows to work on the engine granting great
accessibility without using cables or lifters 2800 S21
- Two sliding hooks to adapt to any vehicle Kit with 21 tools for brake pistons
- Telescopic arm 230 mm extendable
- Sliding shaft extendable from 657 to 887 mm 2550 A - Moves front and rear disk brake pistons back by pushing
- Sliding side arms extendable from 322 to 566 mm Hydraulic service jack 3t for cars and and turning operations
- Arms can move covering chassis at 360 ° commercial vehicles - It allows to easily reposition the brake pistons into the
- Two adjustable feet with anti-slip rubber coating pliers seat
that adapt to the contact surface up to 8° - Steel structure - It includes 2 spindles with left and right rotation and
- Versatile and compact for use in narrow spaces several plates, adapters and accessories
characteristics size - High capacity for use on cars, SUVs and vans - Compatible with the following car models: CITROEN,
AUDI, FIAT / ALFA ROMEO, FORD, ISUZU, HONDA,
Sliding shaft extension min-max (mm) 657÷887 - Dual pump system to lift the car faster
Side arms extension min-max (mm) 322÷566 - Equipped with manual descent control JAGUAR, BMW, MERCEDES, MITSUBISHI, NISSAN,
Sliding shaft and side arms extension min-max 657÷1170 - Air bleed valve, to avoid risk of over-load ROVER, TOYOTA, VOLVO, VOLKSWAGEN, MAZDA, SAAB,
(mm) - Handle with rubber bumper GM, SUBARU, PEUGEOT, RENAULT, MINI, OPEL
Engine support extension (mm) 0÷190 - Polyurethane wheels - Supplied in plastic case
- Rubber disk: code DL.32A-10
capacity code Q.tà x conf. € - Front wheels (2 pieces): code DL.32A-1 LxPxH
a
Cod.
Cod.
a
max Kg Kg mm Kg code Q.tà x conf. €
400 14,5 U19540001 1 - Rear wheels (2 pieces): code DL.32A-9 320x50x250 2,6 U28000085 1
characteristics size
Capacity (t) 3
Max lifting height (mm) 465
Min lifting height (mm) 133

LxP
a
1954 B mm Kg Cod. Q.tà x conf. €
code
615x344 30,5 U25500001 1
Engine support
- Holds engine from above when supports are removed
from vehicle
- Ideal for working on the transmission, clutch, distribution,
engine oil seals, repair of body parts and replacement of
supports
- Side holders: min. 560 mm. Max. 1650 mm.
- Capacity: 500 kg max
characteristics size
Distance between silde holders min-max (mm) 560÷1650
Chain length (mm) 940
2847/3
capacity LxPxH code Q.tà x conf. €
a
Cod.
max Kg mm Kg Brake bleeder
500 1650x50x65 16 U19540002 1
- For changing, filling and bleeding the circuit of brakes on
cars and industrial vehicles
2550 B - Device designed exclusively for brake fluids DOT 3, DOT
Hydraulic service jack 2t 4, DOT 5.1. No LHM.
- Steel structure - Adjustable pressure up to 4 bar
- Automatic stop at 10% of the tank (1 L)
- Versatile and compact for use in narrow spaces - Power supply 12 V with crocodile clips
- Dual pump system to lift the car faster - Rear accessory housing
- Equipped with lifting pedal - Integrated wheels and handle for easy transport
- Equipped with manual descent control - Operating liquid system: peristaltic pump (no direct
2000 A - Air bleed valve, to avoid risk of over-load pump/liquid contact, no air pressure on liquid)
- Handle with rubber bumper
Inspection creeper - Polyurethane wheels - Supplied with spare gaskets, 1 multi-diameter cap 44-
- Headrest in vinyl resistant to hydrocarbons, padded with - Rubber disk: code DL.32A-10 45-46 mm (2847 N11) and tank for oil recovery
high resistance foam rubber - Front wheels (2 pieces): code DL.2LP-1
- Plastic body resistant to hydrocarbons, washable - Rear wheels (2 pieces): code DL.32A-9
- Two side trays for tools characteristics size
- Handle
- Maximum loading capacity: 150 kg Power supply (V) 12
4
Pressure limiting device (bar)
- Maximum height from ground 115 mm characteristics size Tank capacity (l) 10
- Supplied with 6 swivelling rubber casters Ø 80 mm (not Capacity (t) 2 Elastic spiral hose (m) 4
assembled) Max lifting height (mm) 505 Power cable (m) 4
Min lifting height (mm) 75
LxPxH Cod. Q.tà x conf. € LxP Cod. Q.tà x conf. € Cod. Q.tà x conf. €
a
a
a
mm Kg code mm Kg code code
1030x480x115 4,6 U20000100 1 762x350 32,5 U25500002 1 U28470084 1
330