Page 259 - 日本前田TONE

'PS TBGFUZ VTF

For safety use, please read the following attentions carefully before using tools.

.BOVBM TPDLFU XSFODI LJOET

WARNING

The plastic handle is not insulated. Always shut off the power supply
to prevent short-circuit accidents and electric shock accidents during
SOCKET WRENCH
electric work.

CAUTION

Please use tools in original purposes. fig.1

Always use the right size for the fastener head. (BQ

When using socket, please insert it until the nut is covered
completely. (fig.1)
fig.2
Sockets and attachments are hand tools. Do not use them with
power tools. (fig.2)

Use ratchet handles slowly.
fig.3
Switch over the direction completely. Otherwise tooth of gear
may be breaken or gearing system may be idled. (fig.3)

If dust gets inside the ratchet handle, the gear may not move
smoothly. Please check it regularly. fig.4

Please do not add pipes to the handle of the wrench otherwise
it will cause breakage of tools because of overload. (fig.4)
(ratchet handles, spinner handles, other handles)

Please do not strike the grip of ratchet handles or spinner fig.5
handles. (fig.5)

Please do not use tools as hammer.

Please insert the square drive completely. (fig.6)

Please use socket handles that fitting socket, if the size is fig.6
different holding mechanism will not work.
(BQ
Strong shock will cause malfunction of holding mechanism.

Strength of joints is about half of the rachet handle's (JIS and ISO),
because they are composed of output square drive and input square fig.7 $POWFY %SJWF $PODBWF %SJWF
drive, so the power transmission rate is not good. Do not use joints
roughly. (fig.7)

For strong tightening and loosening work please use the standard
type extension bar. Swivel extension bars is about half of strength
compared to the standard type of extension bar.

257