Page 79 - 世霸SuperToolVol.6

WOC

■ PIPE WELDING CLAMP “BRIDGE”

Features
● Pipe fixing and centering can be done by anyone with easy
one-touch operation.
● The body tightening screw has a quick turning mechanism
L1
enabling quick attaching and detaching.
● The parts in contact with the pipes are in stainless steel, so it can
be used for both steel pipe and stainless pipe. GENERAL HAND TOOLS & CLAMPS
T
● No need for temporary welding with piece or for finish grinding.
● The base material prevents scratch and defect.
Example of use
H1

H

D Tool sets /
cases
Socket
wrenches

Ratchet
L wrenches
WOC12
WOC6
Offset
1 Loosen the wing bolts 2 Open the claws of the handle wrenches,
grips
(3 spots). (Fig.1) pipe welding external
Gear
clamp. Hold the grip fast-forward lever grip wrenches,
and lift up the handle open-end
wing bolt to open the claw by clamp bar wing bolt spanners
keeping pressing the Spanners
claw
clamp bar fast-forward lever
(Photo1) (Fig.2).
Safety ropes
Fig.1 Photo1 Fig.2
Combination
hammer
3 Keep open the claws, place handle 4 Tighten the wing bolts (3 spots)
them on the main pipe at until they touch the main pipe.
fast-forward (Fig.4) Sockets
the appropriate position
lever
and fix by tightening the grip wing bolt wing bolt
handle. (Fig.3) Hex key
wrenches
＊ Here, when you lift up
main
the grip while pressing Adjustable
pipe
the fast-forward lever angle
main pipe wrenches
(photo2), the claws Fig.3 Photo2 Fig.4
will close quickly.
Pliers
Hook
5 Loosen the handle, move handle 6 Loosen only the upper-side wing bolt spanners,
(by turning about 1-2 times).
the pipe welding external Insert the pipe or the pipe fitting pin spanners
clamp to the end of the upper-side 7 (elbow, flange, etc.) to be welded upper-side
Toggle
main pipe, and tighten wing bolt between the clamp bars and fix it wing bolt clamps
the handle to fix firmly the to the main pipe by tightening the clamp bar
upper-side wing bolt. (Fig.6)
clamp on the main pipe.
＊ In case the centers are not aligned, pipe or C clamps
(Fig.5) main
main pipe further adjustment is to be made at the pipe pipe
other wing bolts. fitting
move to ＊ In case a groove clearance is L clamps
Fig.5 the end required, secure the indicated Fig.6
clearance and then fix the pipe
or the pipe fitting.
Super
setters
8 Tack weld the pipe or the pipe fitting. 9 Detach the pipe welding external clamp. Hold the grip and loosen
the handle. Lift up the handle while pressing the fast-forward lever
(Photo1). Then the claws will open quickly. Grip pliers
Applicable pipe Size(mm) N.W. Welding
Item No. tools
Size name External diameter D L L1 H H1 T （kg）
WOC6 1〜 6B 34〜170 219〜335 314〜403 255 5.2
230 105 Iron man
WOC12 4〜12B 110〜320 348〜525 448〜568 322 7.9
77