Page 369 - 实耐宝完整US版1500

SPECIAL APPLICATION

Marine Plug Screwdrivers
• Intended for use on marine plugs and other large-slotted fasteners
requiring high torque
• SGD155 series features a large hex bolster for wrench-assisted turning
Stock No. A B C D
SGD153BR .050 3/8 2-3/4 8-1/4 SGD153BR
SGD155CR* .050 1/2 2-29/32 10-3/8
Colors Available
SGD155CR
Red Orange Green
* R O G SCREWDRIVERS
ADD SUFFIX TO STOCK NUMBER FOR SPECIAL COLORS
Push-Pull Spring Tools
• Designed to securely hold and maneuver small- to medium-sized springs
• Deep V-groove tip and C-groove capture prevents spring from sliding off
• Thicker shank versus picks
• Comfortable, durable acetate handle
• Use to remove light- to medium-duty compression or extension springs,
door springs, latch springs, deck tensioner and stabilizer springs SPRG618R
on tractors/mowers, brake adjuster springs, throttle return springs
and recessed can lights with internal springs; also use to move or position
thick-gauge wire and harnesses or to pull cotter pins/latch pins
• Important: These spring tools are non-insulated and should only be used
in non-energized applications
Stock No. A B C D
SPRG618R 3/32 3/16 5-29/32 9-9/16
SPRG625R 7/64 1/4 5-29/32 10-5/16 SPRG625R
Colors Available

Red Orange Green
R O G
ADD SUFFIX TO STOCK NUMBER FOR SPECIAL COLORS
POZIDRIV HARD HANDLE
®

Pozidriv Standard/Hard Handle, Chrome
®
• Walls on tips are less tapered than PHILLIPS tips
®
• Tips have wedges for a tight fit on Pozidriv fasteners
®
• Important: PHILLIPS tip drivers should not be used on
®
®
Pozidriv fasteners (and vice versa), as they will ride out Set SHDZ40R
of the recess, round the tool and screw recess corners Contains:
Stock No. A B C D
SHDZ22R #2 1/4 1-1/2 3-3/4
SHDZ31R #1 3/16 3 7-1/4 •
SHDZ42R #2 1/4 4 8-7/8 •
SHDZ63R #3 5/16 6 10-7/8 •
SHDZ84R #4 3/8 8 13-7/16 • SHDZ40R
RATCHETING SCREWDRIVERS (Blue-Point )
®

®
Ratcheting Screwdrivers (Blue-Point )
®
BSGDMR6 6-Bit Ratcheting Standard Screwdriver (Blue-Point )
• 45-tooth ratcheting mechanism ensures precise positioning and movement
• Bits are stored in a bit magazine inside the handle
• Includes (6) 1/4ʺ hex bits: flat tip (4.5 and 5.5), PHILLIPS (#1 and #2) and BSGDMR6
®
TORX (T15 and T20)
®
• Bits are a consumable and carry no warranty
• Do not use screwdrivers as prybars, chisels or punches
• Do not use “cheater bars” on handles 367
• ‡ These products can expose you to chemicals which are known to the state of California to cause cancer and
reproductive harm. See pages 906-907 for details.
• Read safety precautions on pages W1 to W4

355-371 HT_old_304-319_Screwdrivers.indd 367 12/10/19 4:01 PM