Page 230 - HAZET英文2021

Hand Tools

Internal extractor

Internal extractor

1788 N Internal extractor 1788 N Internal extractor set

Made in Germany C
• Application: Extracting ball bearings, outer rings and bushings
• To be used with counter stays 1788 N-835 and -4570 1 è 4
+ = Reinforced bond – easy and safe extraction of needle
bearings, ball bearings and brass sleeves 1788 N
1788 N-835 • 1788 N-4570 • 1788 N-15 • 1788 N-19
1788 N-25 • 1788 N-30 • 1788 N-35 • 1788 N-45
1788 N/8 8 133185
1788 N
1788 N-835 • 1788 N-4570 • 1788 N-15 • 1788 N-19 • 1788 N-25
1788 N-30 • 1788 N-35 • 1788 N-45 • 1788 N-55 • 1788 N-70
1788 N/10 10 147939

1788 T Internal extractor set

Made in Germany
1 t R 4 • Titanium-nitrided surface extra hard and wear-resistant
1788 N-12 + 12 – 14 M 10 147694 • For tightly-packed ball bearings, rings, bushings and shaft seals Simmer ®
1788 N-14 + 14 – 19 M 10 147700 • Flexible material
1788 N-15 12 – 15 M 10 134861 • Absolutely precise manufacturing accuracy providing a higher power transfer
1788 N-19 15 – 19 M 10 134878 • High ease of use
1788 N-25 19 – 25 M 10 134885 • Only 4 Internal Extractors allow to cover the range from 5 to 36 mm
1788 N-30 25 – 30 M 10 134892 • To be used with sliding hammer or counter stay
1788 N-35 30 – 35 M 10 134915 • Well-composed set
1788 N-45 35 – 45 M 14 x 1.5 134502 • Hard and wear-resistant titanium nitrided surfaces providing
1788 N-55 45 – 55 M 14 x 1.5 136209 a better and heat-resistant surface protection
1788 N-70 55 – 70 M 14 x 1.5 136216 • Application:
• Insert internal extractor into bearing
and screw in spindle
1788 N Counter stay • The sharp shells press behind
the part to be removed
• Place sliding hammer or
Made in Germany counter stay in position
• For internal extractors HAZET 1788 N-12 up to -70 • Plastic box
• Surface: chrome-plated

1 Spindle 4 1 R K è 4
• For internal extractors 1788 N-12 up to 35 • Internal extractor set, contents:
1788 T-1 ∙ 1788 T-8.5
1788 N- 835 M 10 mm 134854 1788 T-15 ∙ 24 ∙ 36
• For internal extractors 1788 N-45 up to 55 1788 T/5 – – 5 133666
1788 N-4570 M 14 x 1.5 mm 134908 • Impact extractor (sliding hammer – sliding weight
200 g) with coupler thread M 10
• Removal of caps with inside thread, ball bearings, washers etc.
1788 N Internal extractor set • To be used with stud bolt set 1788 T-1/6 and internal extractors 1788 N-15 to 35
• Also together with injector extractor 4797-5
Made in Germany 1788 T-1 M 10 226 – 134304
• Extracting ball bearings, ball-bearing outer rings and
bushings
1788 T Stud bolt set
• Internal extractor and counter stay
• Sheet metal box (HAZET-blue)
Made in Germany
• Application: Removing different caps with inside thread
• 6-piece set, stud bolts with M 10 coupler thread, contents:
1 piece each threaded insert M 4, M 5, M 6, M 8, M 10, M 12
Use with sliding hammer 1788 T-1

1 è 4
B 1788 T-1/6 6 141647

Components and spare parts from page 482 to 490 Valid until December 31, 2021 229