Page 108 - HAZET英文2021

Hand Tools

Wrenches
Comparison of the HAZET traction profile

with conventional screw profiles

HAZET traction profile

The HAZET traction profile has been especially developed to a minimum and protects the screw head from damage,
for HAZET wrenches without sharp edges or points. A such as deformations or wearing of corners. Even damaged
strong and also safe transfer of torque is ensured by the screws can still be turned safely and effectively, because
protected contact surface of the traction profile in the slipping out and sliding off are virtually ruled out.
screw head. This reduces the notching effect in the tool
$ 6-point % 12-point

More secure friction lock thanks to protected contact surface
(also for screws outside the tolerance).

Equal distribution of force on the screw head
edges. No straight turning of the screw head
due to a changed point of application.

Secure loosening of slightly damaged or worn
screw heads thanks to a gentle transfer of torque.
The tool is prevented from sliding out.

Up to 20% higher torques thanks to an optimal friction lock.

Conventional screw profiles

6-point 12-point

Poorer friction lock due to an unprotected contact
surface. Slipping out when working with screws
poses the risk of injuries or damage to components.
The torque can no longer be applied safely.

Sharp edges or points increase the risk of a
notching effect and in the worst cases can damage
or destroy the screw profile of the tool.

Due to the slipping out of the wrench with damaged (e.g.
straight-turned) screw heads, the loosening process
is made more difficult or impossible. An effective
transfer of the required torque is no longer possible.

Force acts primarily on the point of the screw profile. This
isolated loading causes damage to the screw profile.

Components and spare parts from page 482 to 490 Valid until December 31, 2021 107