Page 55 - 日本GOOT吉欧欧替 Vol.51 (英文)

XFC series FEATURES TABLE SYSTEM SOLDERING
FUNCTION XFC-301 XFC-300 XFC-210 XFC-110
Auto-lift* ✓ — — —
5-zone Profiles ✓ ✓ ✓ — SOLDERING IRONS
Auto Profile Mode ✓ ✓ — —
Normal Profile Mode ✓ ✓ ✓ —
Hand Mode ✓ ✓ ✓ ✓
Saving of Profile Mode and Hand Mode ✓ ✓ ✓ —
PID Control ✓ ✓ P…control —
ON/OFF and Vacuum Control on Handpiece ✓ ✓ ✓ —
Interface to Control Preheater ✓ ✓ ✓ —
Keypad Lock, Offset ✓ ✓ ✓ —
Forced Cool-down ✓ ✓ ✓ ✓
Vacuum Pick-up ✓ ✓ ✓ ✓
Digital Display ✓ ✓ ✓ ✓
Flow Meter ✓ ✓ ✓ ✓
Auto Cool-down — — ✓ ✓
Ergonomic Handpiece ✓ ✓ ✓ ✓ AUTOMATIC
*Handpiece with removed SMD can be lifted automatically after the reflow process is finished. SOLDER FEEDER
SPECIFICATIONS

Model XFC-301 XFC-300 XFC-210 XFC-110
Voltage 220–240 V AC 50/ 60 Hz 220 V, 230 V, 240 V AC 50/ 60 Hz
Power Consumption 400–460 W 470 W TIP THERMOMETER SOLDERING TESTER
Power Cord Length 1.5 m (3 core cord) Inlet type
Temperature Setting 50–550°C 150–550°C
Range
Insulation Resistance Over 10 MΩ (500 V DC)
Control Unit
Model XFC-301 XFC-300 XFC-210 XFC-110 SOLDER POTS
Output Voltage 220–240 V AC 220 V, 230 V, 240 V AC
Air-flow Meter Equipped
Air-flow Volume 5–25L /min 5–23L /min 5–25L /min
Auto-lift Function Included -
3 (Profile-Flat, Profile-Slope,
Modes 3 (Profile-Normal, Profile-Auto, Hand) 1 (Hand)
Hand) / SMT PRODUCTS
Temperature Profiles 5 Zones (Temperature and Time) − SURFACE-MOUNT
Profile Memory ( Auto, Normal )×19, HAND×1 ( Flat,Slope)×19, HAND×1 −
Dimensions 200 (W) ×230 (H) ×265 (D) mm 182 (W) ×179 (H)× 263 (D) mm
Weight 7.6 kg ( w/o cord ) 8.4 kg ( w/o cord ) 7.8 kg ( w/o cord )
Handpiece Holder,
Accessory Connection Cable with Preheater, Handpiece Holder, XVCW-SET
XVCW-SET PRODUCTS DESOLDERING
Handpiece Unit

Model XFC-301 XFC-300 XFC-210 XFC-110
Voltage 220-240 V AC 220 V, 230 V, 240 V AC
Power Consumption 370-430 W 400 W
Heater Nichrome Heater ACCESSORIES SOLDERING
Hose Length between
Handpiece and Control 1 m
Unit
Vacuum Pickup Integrated into Handpiece
Length 220 mm (w/o cord)
Weight 180 g (w/o nozzle, cord) MATERIALS

REPLACEMENT PARTS / OPTIONS SOLDERING WORK
MODES XFC-301/300 AUTO PROFILE EXAMPLE Heater Vacuum Cup ø6 mm
XFC-100H XVCW-6
[TEMP]
NORMAL Create your own profiles for the 5 zones. REFLOW
XFC Heater Pipe Vacuum Cup ø8 mm
AUTO Can be set to the desired profile without a PREHEAT XFC-100HP XVCW-8 HEATED TOOLS
test. (PAT.) XFC-301/300 only
Vacuum Cup Set Vacuum Cup ø10 mm
HAND Configure temperature settings for COOL XVCW-SET XVCW-10
manual rework.
Vacuum Cup
PREHEAT1 PREHEAT2 PREHEAT3 REFLOW COOL
[ TIME ]
П П П (mm) HAND TOOLS

www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
55