Page 25 - 日本GOOT吉欧欧替 Vol.51 (英文)

PRODUCT SPECIFICATIONS / FUNCTIONS SYSTEM SOLDERING

SPECIFICATIONS Control Unit
Output Voltage 24 V AC
Model RX-802ASPH Dimensions 115 (W) × 98 (H) × 146 (D) mm SOLDERING IRONS
Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Weight 1.8 kg
Power Consumption 80 W Iron Unit
Power Cord Length 1.2 m inlet type
Temperature Setting Range 50–450°C Model RX-80GASPH LEAD-FREE TEMPERATURE-CONTROLLED
Ripple Temperature ±5˚C (unloaded) Iron Unit N2 Gas Adaptive Iron Unit
Insulation Resistance Over 100 MΩ (500 V DC) Voltage/Consumption 24 V AC / 72 W
N2 Gas Adaptive Iron Unit RX-80GASPH (included) Ground Resistance 2 Ω or less
Applicable Iron Units 80 W Standard Iron Unit *RX-80GAS (sold separately) Leak Voltage Less than 2 mV
*Non-N2, also supported. Micro-Iron Unit *RX-81GAS (sold separately) Heater Nichrome heater
Soldering Tweezers Unit *XST-80G (sold separately) Gas Supply Pressure 0.2M Pa (2 kgf/ cm ) 2
Iron Unit (RX-80GASPH) Cord Length 1.2 m
Accessories
Soldering Iron Stand (ST-22) Length 158 mm (with RX-80HRT-PHB)
Weight 33 g (with RX-80HRT-PHB)
Equivalent to IPC/EIA J-STD-001C
For basic performance, please refer to RX-802AS, page 18.
*The length does not include the cord bushing. The weight does not include the cord.
The Iron Unit RX-80GAS/ RX-81GAS/ XST-80G cannot be used AUTOMATIC
as an N2 soldering iron. For replacement tips, refer to p. 29 SOLDER FEEDER
For Soldering Tweezers XST-80G, refer to p. 58

REPLACEMENT PARTS / OPTIONS

RX-802ASPH Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit N2 O-ring Tip changing tool Soldering Iron Stand Sponge Soldering Iron Stand Cleaner TIP THERMOMETER SOLDERING TESTER
RX-80GASPH RX-80GAS RX-81GAS RX-80PHP RX-80PHC ST-53SP ST-40BW
Tip is not included Tip is not included Tip is not included (2pcs./set)

Non-N2, also supported Non-N2, also supported SOLDER POTS

A compact N2 station combining NITROGEN GENERATION DENSITY
N2 generator and controller.
(According to in-house The relation between Nitrogen density,
N2 STATION RoHS ANTI measuring method) 100 flow rate, and input air pressure / SMT PRODUCTS SURFACE-MOUNT
NC-100R 2 STATIC 95
The special separation mem-
brane separates the nitrogen 90
from the compressed air pro- Nitrogen density [%]
duced by a compressor. 85 PRODUCTS DESOLDERING
Maintains a stable output 0.3[MPa]
pressure(0.2Mpa). Two-tiered 80 0.5[MPa]
setting with RX-802ASPH 0.7[MPa]
achieves efficient work in
smaller space. 75 0.5 1 1.5 2.0 2.5 3.0 3.5 4.0
Flow rate [L / min] ACCESSORIES SOLDERING

- NJO 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
.1B
0.3 98.7 96.6 94.5 92.0 90.8 89.7 88.5 87.5
0.5 99.8 99.2 98.0 96.8 95.7 94.8 93.8 92.6
0.7 99.9 99.7 99.2 98.3 97.7 97.1 96.3 95.4 MATERIALS
An example of measured values
SPECIFICATIONS SOLDERING WORK
■SET-UP EXAMPLE
Model NC-100R RX-802ASPH + NC-100R
Input Pressure 0.3−0.7 MPa
Input Temperature 5−50˚C
Nitrogen Generation 99.5% or more (0.7 MPa, 0.5L / min)
Density HEATED TOOLS
Recommended Nitrogen 1.0L / min
Generation Flow Rate
Flow Meter 0.5-4.0L / min
118 (W) × 112 (H) × 185 (D) mm
Dimensions
(not including protruding parts)
Weight 2kg HAND TOOLS
Input: Outer diameter ø6 mm
Required Tube Dimension
Output : Outer diameter ø4 mm
www.goot.co.jp/en/ 5"*:0 &-&$53*$ */% $0 -5% 2020-2021
25