Page 241 - ELORA-Tool_Catalogue_E95

CLICKING TORQUE WRENCHES AND INSERT TOOLS

2033-20
2033-20
TORQUE WRENCH WITH RECTANGULAR INTAKE
DREHMOMENTSCHLÜSSEL MIT RECHTECKAUFNAHME
for use with ELORA interchangeable spanner h
³ ➤ zur Aufnahme von ELORA Einsteckwerkzeugeneads
main measurement unit for Nm with vernier sca
³ ➤ Haupteinheit Nm mit Nonius, Nebeneinheit in-lble, secondary measurement unit for ft-lb
safe locking of the set torque value
³ ➤ mit sicherer Arretierung des eingestellten Drehmomentwertes
bi-directional fixing by turning the torque wrench
³ ➤ für Rechts- und Linksanzug
with robust, matt steel tube
³ ➤ mit robustem, matt verchromten Stahlrohr
with very noticeable and audible (‚‘click‘‘) signal
³ ➤ mit gut fühlbarem und hörbarem (‘‘click‘‘) Signal
nonslip QUATROLIT -2C-handle
®
³ ➤ 2 Komponenten Quatrolit-Griff
factory depth gauges: S = 17,5 mm (9 x 12 mm) and S = 25 mm (14 x 18 mm)
³ ➤ Werkskalibrierstichmaß: S = 17,5 mm bei Rechteckaufnahme 9x12mm
s
s
s
according to DIN EN ISO 6789:2017 Part 1, Typ II Class A
³ ➤ kalibriert auf eine Abweichung von +- 4%
with traceable declaration of conformance
³ ➤ nach DIN EN ISO 6789:2017 Teil 1, Typ II Klasse A, mit rückführbarer Konformitätserklärung
³ tripping accuracy +- 4%
neuer Artikel!
Drive Measuring Graduation Measuring Graduation l/mm Pieces Weight/g
Code Number l mm
mm s range Nm Nm range in.lb. in.lb. T U V
2033000201000 2033-20 9x12 282,5 4-20 0,1 39,8-172,6 0,9 315 1 595
2034-...
TORQUE WRENCH WITH RECTANGULAR INTAKE
³ for use with ELORA interchangeable spanner heads 05
³ main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.
³ safe locking of the adjusted torque value by securing button at the handle end
³ ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant
³ for clockwise and anti-clockwise tightening by turning the torque wrench
³ with robust, matt steel tube
³ with very noticeable and audible (‚‘click‘‘) signal
®
³ nonslip QUATROLIT -2C-handle
³ factory depth gauges: S = 17,5 mm (9 x 12 mm) and S = 25 mm (14 x 18 mm)
s s
³ according to DIN EN ISO 6789:2017 Part 1, Typ II Class A
³ with traceable declaration of conformance
³ tripping accuracy +- 4%

Drive Measuring Graduation Measuring Graduation l/mm Pieces Weight/g
Code Number l mm
mm s range Nm Nm range ft.lb. ft.lb. T U V
2034000601000 2034-60 9x12 314,5 10-60 0,25 9-45 4 345 1 1000
2034001251000 2034-125 9x12 370,5 25-125 0,25 20-90 5 438 1 900
2034002001000 2034-200 14x18 410,0 40-200 0,5 30-150 10 455 1 1198
2034003351000 2034-335 14x18 470,0 65-335 0,75 50-250 10 515 1 1305

Expert knowledge on insert tools This can be done using the following formula:

When using insert tools, it is essential to take into M x l S = M
S
account the stated extension. I + S - S I
S
S
V
If the extension for the insert tool to be used is exactly Where:
the same as the work calibration extension M target torque
S
(S = 17.5 mm for 9 x 12 mm mounts and l S lever length of the torque wrench +
S
S = 25 mm for 14 x 18 mm mounts) of the torque wrench, the works calibration extension
S
torque level you have set will be correct. S extension of the insert tool
V
S works calibration extension
S
Where insert tools having a different extension value are to be (S = 17.5 mm for 9 x 12 mm mounts
S
used, the set torque M will have to be calculated to ensure that and S =25 mm for 14 x 18 mm mounts)
S
I
the required target torque (M ) is, in fact, achieved. M I torque setting on the wrench
S
info@elora.de www.elora.de 241